Jump to content

XF23mm F2 rumors


Patrick FR

Recommended Posts

Yes! If it had the same relationship to the "big" 23 as the 35/2 has to the 35/1.4 - that would be a fantastic development. I would most likely buy one. The 23/1.4 is outstanding - but a "little brother" - smaller, slower, less expensive, more even performance, but less peak performance - that would be a very welcome development indeed. A lot of folks have told me it would never happen "because it would cannibalize the X100 series" - but hopefully Fuji has realized the differentiator for the X100 is the viewfinder, not the lens.

Link to post
Share on other sites

  • 2 weeks later...

If you already have the 35 f/2 WB which is close in focal lenght and with same aperture? Would it still make sense to get this lens?

I have the 35 F2 WR and the 23 F1.4.

 

they're not close at all in terms of focal length.

Edited by oscillik
Link to post
Share on other sites

You can have a lens that is Cheap, Small, Good ( and I will add light efficient too), but you can only pick two characteristics simultaneously. Anything else is wishful thinking and I don’t do that.

Cheap? You can have a lens that is very good and quite inexpensive and quite good. I suspect that the 35mm f/2 is going to be one of those lenses. 

 

What you cannot have, at least not from what I've seen, is a lens that is cheap, good, small, and with a very large maximum aperture. There are trade-offs, but perhaps not quite the ones you list.

Link to post
Share on other sites

We can debate all day long about that point, but I do get your need for an aperture ring. I personally prefer something as low profile as possible as it is easier to fit in a coat pocket or the side pocket of a bag.

Honestly - I would prefer an aperture ring - but if it really were as small as the 27 - I could certainly learn to live without it. Either way - still a strong "buy."

Link to post
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

  • Posts

    • The Tentacle Sync Timecode tool is the one I tried. I couldn't get it to work. But that is probably my fault, not the software. I seemed to get a file, but I couldn't turn it into anything meaningful. 
    • I am glad to read you are able to get this up and running. Pretty much as long as you connect the camera and turn it on and wait a few moments for the computer to register the connection, you can then use Image Capture (which actually is a very decent program with a lot of options for transferring images from cameras to the computer) or Lightroom or other programs to move the images to your library. There are some drawbacks; connecting to the computer while it is in sleep mode will waste your time, the connection will not get recognized— you will have to unplug the camera, wake the computer and start over. Trying to connect while the screen saver is running may work, it may not, often not. If the computer goes into screen saver mode while the camera is connected and sitting idle, it usually stays connected when coming back out of screen saver, but if the computer mputer goes into sleep mode, the connection gets dropped and you have to unplug it and start over. I suggested having the camera turned off while connecting, this is to lower the possibility of static electricity discharges frying either the camera or the computer or both. A lot of times you can connect while the camera is turned on, but not always, sometimes you have to unplug, turn it off, reconnect and turn it back on. A lot of this comes from Apple’s approaches towards keeping USB devices from hijacking your computer, some is just hubris and some is from the vagaries of chance. p.s. Your laptop should be able to connect to the camera.
    • Hi Chas, I am just fallen into the rabbit hole of investigating how to upgrade my X-T4's video sound... Loving the idea of time code sync, I am now quite concerned that the X-T4 doesn't support it, although I have already seen different statements on the net, like here:  https://youtu.be/xja27RmvbhE?si=hIch3Tu_MH_pWSBH&t=571 I have to admit, this guy's "explanation" gets quite confusing in his further discourse ...:) BUT, as you wrote that you use Tentacle Sync for Windows!, did you also try with their windows-only software "Time Code Tool" which you find here?: https://tentaclesync.com/timecode-tool   Would love to here if you found a workaround with the XT4 Best, Simon
    • It occurred sometime when I focus. It is not silent 
    • This is the video for the focusing sound. Anyone can help?🙏🏻🙏🏻🙏🏻thanks a lot IMG_3226.mov
×
×
  • Create New...