Jump to content

T2 advantages over X-Pro2


bitbonk

Recommended Posts

Now that the X-T2 is out, I would like to compile a comprehensive list of advantages the X-T2 has over the X-Pro2. Can you help?

 

Starting with the viewfiner: it is brighter and larger (how much larger?) and has a higher framerate (100fps instead of 70fps), right?

Link to post
Share on other sites

I think one of main advantages is the AF improvement, mainly about AF-C settings.

But let's wait for next X-Pro2 firmware update (2.0) coming in October that promises AF improvements.

AF improvements in general will be transferred to the X-Pro 2.

But the AF-C settings are X-T2 exclusive.

Link to post
Share on other sites

Starting with the viewfiner: it is brighter and larger (how much larger?) and has a higher framerate (100fps instead of 70fps), right?

It has a 0.77 magnification compared to 0.59x with the X-Pro2

 

More advantages:

- 4k Video

- USB 3.0 transferring 480MB/s

 

And of course different ergonomics...

 

Andreas

Link to post
Share on other sites

Off the top of my head:

 

4K

 

F-Log (via HDMI, also 4:2:2 via HDMI)

 

Headphone jack (in grip)

 

3.5mm mic jack

 

AF-C profiles

 

Bigger/Better EFV

 

Zebra

 

Peaking during video recording

 

Live audio monitoring that can be adjusted by assigned buttons

 

More AF points and more contrast detect AF points

 

Tilty sceen

 

Both slots are UHS-II type (only slot one is on the xpro 2)

 

Battery grip (xpro2 obviously doesn't have

 

11fps in boost mode and apparently it can go 14fps with some restrictions

 

I think the buffer is bigger

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • It is really easy to find out if the wifi is on. Your computer or tablet or cell phone will have a network settings dealing with wifi, bluetooth, ethernet or “other”. Open that up and go into the section for wifi, and take note of which networks are listed. Turn on the camera and keep watching the list of networks. If your camera’s wifi is turned on, a new network should suddenly show up in your computer/tablet/phone’s network listings. Now go into the camera’s menus and start a wireless connection (the x-app or camera remote app can help you with this). You should see a network show up now. It is not hidden because it has to be visible so that your computer/tablet/phone can join the camera’s network to transfer images. Turn the camera off and that network should disappear. Turn the camera back on and see what happens.
    • Sweet Creek Falls, Oregon. X-H1, Viltrox 13mm F1.4, Acros.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • I think my Fuji 150-600 F8 is a brilliant wildlife lens in terms of sharpness, portability and value but the small aperture does cause issues at the start and end of the day - even pushing the ISO as far as I dare, I can see shutter speed down to 1/25s - stabilisation isn't an issue but asking a deer to stand still for that is too much! In the same situation, an F4 would give 1/100s so the difference to the success rate would be phenomenal... and that's without the other improvements like shallower depth of field. I also find that the Fuji's subject detect AF gets pretty iffy in low light - I keep updating to the latest firmware but it doesn't seem to get any better. I was originally looking at the Nikon 500mm F4 E but good examples secondhand are still reasonably expensive but like-for-like Sigma lenses are around half the price. Reviews I have read suggest that they are as good optically, AF performance and IS-wise but you gain a few hundred grams of weight (but less than the older Nikon model). For a couple of grand, I can live with that. Does anyone have any experience mounting one on an XH2S? What about with the 1.4 teleconverter? It feels like that is pushing it anyway - hefty lens + TC + Fringer all sounds a bit...wobbly? It is on the Fringer approved list but I am wary about AF speed in particular. I had also considered looking for a used Nikon 400mm F2.8, which would be even faster (and heavier) and could couple with a TC to give 560mm F4 but again, it is that lens+TC+Fringer combination that worries me as being just too many links in the chain. Of course, what I really want is a native Fuji prime but that doesn't seem to be on the horizon - and if you look at what Nikon and Sony are doing, if Fuji do ever bring out a 500mm prime, it will probably be a small, light and cheapish F5.6, which is only 2/3 stop better than my zoom at the same focal length. Any thoughts anyone?
    • The Amazon link is an annoying feature of this forum - its automatic and is applied to every post for advertising purposes. My question was - how do you know the camera wi-fi is on and requires turning off? I would have thought this would just use up the battery for no purpose if you aren't specifically using a function that requires wi-fi.
    • I've made a point to push Angelbird memory products as they are the best performance cards you can get, The sustained write speed is important.
×
×
  • Create New...