Jump to content

wedding shoot, recommendation needed for focus settings

shane

By shane
in General Discussion

 Share

Recommended Posts

Paul Crespel Rising Star

Paul Crespel

Posted
Posted

Hello Shane,

 

A wedding is a very important event, which can't easily be rewound and replayed for a re-shoot if you get the photos wrong. 

 

My advice to you is, if you need to ask such a question, then perhaps it would be better to have the assurance of an experienced wedding photographer present to ensure backup for any mistakes.

 

You don't get a second chance at a wedding, and if you screw up through lack of experience, you are going to disappoint the wedding couple, their family and their friends, and possibly leave yourself open to a lawsuit.

 

In a church (down the aisle), a telephoto is not ideal.  You need 21mm or 28mm to allow for low light, and the depth of field and surroundings to give the photo some context.  You don't want to blur the background in the church, you want to include it.

 

Really, think very carefully about covering the wedding until you've followed experienced wedding photographers enough to understand what is expected, and to have enough experience not to screw up.  It's a BIG responsability :)

Link to post
Share on other sites
jlmphotos Experienced

jlmphotos

Posted
Posted

Hello Shane,

 

A wedding is a very important event, which can't easily be rewound and replayed for a re-shoot if you get the photos wrong. 

 

My advice to you is, if you need to ask such a question, then perhaps it would be better to have the assurance of an experienced wedding photographer present to ensure backup for any mistakes.

 

You don't get a second chance at a wedding, and if you screw up through lack of experience, you are going to disappoint the wedding couple, their family and their friends, and possibly leave yourself open to a lawsuit.

 

In a church (down the aisle), a telephoto is not ideal.  You need 21mm or 28mm to allow for low light, and the depth of field and surroundings to give the photo some context.  You don't want to blur the background in the church, you want to include it.

 

Really, think very carefully about covering the wedding until you've followed experienced wedding photographers enough to understand what is expected, and to have enough experience not to screw up.  It's a BIG responsability :)

AGREED!  That is unless you know the couple and they've ASKED you to do the photography.  

Link to post
Share on other sites
shane Newbie

shane

Posted
  • Author
Posted

gentlemen,

Thanks for the advise regarding shooting a wedding, I do understand the stakes. Thy are clear, that they want me to do this. I do commercial work, and have shot fashion and event, so can perform when needed. I was just hoping for advice on the best focus options, my success rate with focus tracking is not impressive. I do better with back button focus, and manual focus.

regards

Shane

Link to post
Share on other sites
leifbrandt Rookie

leifbrandt

Posted
Posted

To answer what I think Shane was getting at...So far I've preferred AF-S with the low burst.  I've tried the continuous focusing mode but it was a little hit and miss.  I've only shot a couple of processionals with the fuji set up, but in decent light single focus worked fine for me.  I usually have two bodies on me...18mm and 35mm...or 23mm and 56mm...just depends a little on the venue.  I know with the AF-C focusing mode it's best to keep it to the 9 AF points in the center and do either the low or high burst mode.  The last one I shot with a x100t in AF-C and the x-t1 with the 35mm on AF-S.

 

I wasn't super familiar with the x100t and found it best to set everything manual on it.  For me when it was in Aperture priority or auto ISO, it made odd choices.  It did fine in AF-C and low burst in good light.  The XT1 did great as well.

 

I've shot on Nikon and Canon...while Nikon has the better AF speed and accuracy overall, I feel like the fuji does just as good as when I was shooting on the Canon 5d MarkIII.  Have fun, try to anticipate what's going to happen next, and have a lot of extra batteries.  

Link to post
Share on other sites
Dis Collaborator

Dis

Posted
Posted

I was just hoping for advice on the best focus options, my success rate with focus tracking is not impressive. I do better with back button focus, and manual focus.

Have you tried AF-C + zone 9 + Cl? This usually works great for me with such slow motion like aisle walking.

 

Back in manual focus days we were shooting with prefocus. Focus peak assist and continuous drive revive this technique for me.

Link to post
Share on other sites
ryan2007 Newbie

ryan2007

Posted
Posted

gentlemen,

Thanks for the advise regarding shooting a wedding, I do understand the stakes. Thy are clear, that they want me to do this. I do commercial work, and have shot fashion and event, so can perform when needed. I was just hoping for advice on the best focus options, my success rate with focus tracking is not impressive. I do better with back button focus, and manual focus.

regards

Shane

I have the same type of concern. My plan is the 16-55 mm 2.8 with a mono-pod. My thought is a zoom will allow me to recompose faster than a prime lens as who ever is walking the isle gets closer to camera position. The one thing I am thinking is to get focus confirmation. On the back of the XT-1 their is a light that occasional blinks. It is for both the SD card recording and a Warning that the exposure is a problem. In short I know if it is blinking green on the back of the camera I need to change exposure or re-focus, something is wrong.

Link to post
Share on other sites
shane Newbie

shane

Posted
  • Author
Posted

hey  newbie,

forget the zoom and monopod. you need a fast prime like the 35 1.4 or the 56 1.2 and zoom with your feet. I did testing, and it focused better when i walked backwards with the bride and groom. In the rehearsal I got to do testing in actual conditions

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Cronin
      Display ISO will be chosen when auto iso is set

      By Cronin · Posted

      Found the simple answer to my own question. Having assigned Auto ISO to the rear dial, I only have to push in the dial to make the Auto ISO options appear, then turn the dial to choose. Nice and fast.
    • Cronin
      Introduce Yourself

      By Cronin · Posted

      Hello All, I am returning to photography after a decades-long hiatus that was prompted by my loss of access to a darkroom. Digital rendered that excuse moot, so I now return with a recently purchased XT5. I am from the Hudson River Valley in New York where I have spent the past five decades engaged in environmental work, mostly on the Hudson. I teach at Pace University where I direct the Gale Epstein Center for Technology, Policy and the Environment. My project ahead is documenting the unseen Hudson, a combination of the obscure, under-appreciated, and invisible - a street-style approach to people, places and things that make the river what it is. There will be little landscape, if any. The "Mighty Hudson" is well-documented. If nothing else, it will be a mission-driven project to bring me back to photography while learning my camera. I look forward to everything this amazing site can teach me. Cronin
    • IMX
      Fuji X-T4 AF-S and-C

      By IMX · Posted

      Hi,   I would really appreciate if someone could answer this question. Is it possible to have the X-T4 shoot in AF-S for photo mode and AF-C in video mode while the front lever is left at AF-S?  If so, how would this be done or wher in the menu system would I set this up? This is similare to setting the apeture at f/2.8 for photo mode but fioming at f/4 in video which I already have setup. Thanks and kind regards
    • SimonW
      Display ISO will be chosen when auto iso is set

      By SimonW · Posted

      According to the manual you can assign auto ISO to any one of the function buttons but I've never tried it. (It's not something I frequently change so all my function buttons do other things.)
    • Cronin
      Display ISO will be chosen when auto iso is set

      By Cronin · Posted

      Hello, I have a new xt5 and have enjoyed its setup, until now. I hope someone with patience can help me through my ISO dilemma. My question: I have assigned settings for Auto ISO 1,2 and 3.  Should I be able to select Auto ISO 1, 2, or 3 for a shot? If so, how?  Or is the camera supposed to. At present, my screen shows Auto ISO 3, and never changes. I assigned ISO to the rear dial to no effect. Of course, when I half depress the shutter button is see the actual ISO in real time, but the function of the Auto ISO and how to control it has me confused. Thanks for any help. 
×
×
  • Create New...