Jump to content
Bill5818

Remote Shutter release not working on XT2

Recommended Posts

Advertisement (gone after registration)

I have three remote shutter cables, all with the 2.5 mm jack. These cables have worked flawlessly for the last several years with all my Fuji and Canon cameras. Just the other day, they stopped firing the shutter on my XT-2. A half press works as expected, but with the full press nothing happened. All three cables work flawlessly on my XT-10. I have blown out the socket on the camera, and it looks clean. Any ideas would be much appreciated.

Share this post


Link to post
Share on other sites

For what it's worth (not much, I'm afraid), I can confirm that my several Canon RS-60E3 remote releases (2.5mm jack) are still working fine with my X-T2 and other Fuji cameras. It does sound as if something's preventing a connection in your X-T2's 2.5mm socket. Sorry I can't be of more help.

Share this post


Link to post
Share on other sites

Sounds to me like you have something in the hole. Check closely to make sure. If not, it is not likely that all three releases are bad

I just checked my XT-2 and I have a few different brands  of 2.5 mm jack releases and they all work. The contact points in the hole are likely just flexed metal for the side and that can be flexed too much and lose contact. Try wiggling the plug when you engage the shutter button.

If all else fails consider getting a remote trigger that fits the USB (small part) or go truly retro and get a cable release. Either one of these work-arounds would likely be much cheaper than having the socket replaced. Good luck...…….Bob

 

Share this post


Link to post
Share on other sites
Posted (edited)

Same issue here with my xt2 that reacts abnormally to focus/shutter control . I suspect a short circuit between focus and shutter when the 2.5mm jack is engaged. Focus react when contact shuts buf stay engaged after contact release

Edited by alpheratz06
spelling

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Posts

    • I do not believe that it is the video features that caused the increase in size and weight. It is the added IBIS.  
    • ditto, some of my beat BNW shots are from my XE1
    • Not enough information here. I assume you have downloaded to a computer? What type of computer and which operating system? How did you download the files and how are you viewing them? Which application are you using? How do you know you are getting 1920x1080 resolution? Are you viewing the raw file or the jpg? If this is the jpg what jpg settings did you use in the camera?
    • Brought back the X-T30 today and tried 3 in store - all exhibited same issue in varying degrees of yellow tint.  I was offered a refund but opted to try more as I shop regularly at the store. They have contacted Fujifilm to order others from possibly another batch to test.  Absolute joke in my opinion.    My X-E2s, X-T1 and evening X-M1 do t exhibit this problem.    I did order a 2nd X-E2s when B&H had a sale and it had the issue and had to be sent back also a few years
    • Hi,    I have the Fuji X-A5 and it's been working fine the last few weeks. But after my last session all the images I downloaded are at resolution 1920x1080. The odd thing is that their file size is still 40MB+ I usually shoot just raw but I changed it too Raw+Fine so I could preview the full images in camera. So does anyone know whats going on here?   Regards, Tommy  
×
×
  • Create New...