Jump to content

Recommended Posts

I am on the hunt for an X-t2 and one popped up on the B&H website.  The catch is that it is a "gray market" product (aka imported) which does not carry the manufacturer's warranty but B&H warrants the product for one year.  Has anyone had any experience with a purchase of this type?  Good, bad, or otherwise?  Thank you in advance.

 

https://www.bhphotovideo.com/c/product/1263603-GREY/fujifilm_16519314_x_t2_mirrorless_digital_camera.html 

Link to post
Share on other sites

To quote an American folk hero: What you have to ask yourself is  "Do I feel lucky"?

 

Most problems show up quickly, so the basic one year warranty will probably take care of likely problems. It seems like the biggest question is whether you can get it serviced by Fuji in the future? In many cases, the original manufacturer will not work on a unit that was not sold under their terms and conditions for the country in question. If that is the case, who will work on it?

 

I have no experience with this particular product and the associated service issues, but I have bought some gray market gear over the years. Some worked out and some didn't.

Link to post
Share on other sites

B&H reimbursed 100% cost of my grey market LG phone, two months short of a full year. I assume that they would do the same for a camera.

 

The question is if Fuji would be willing to service the camera after a year, on a paid basis.

 

For instance, Nikon used to refuse any service for grey market gear in the past, although they changed their policies for D750 recently.

 

I did not have a chance to hear how Fuji handles that.

Edited by Maksim
Link to post
Share on other sites

All Fuji equipment ( aside from Instax) comes with an international guarantee and most local Fuji will honor this guarantee for a year, there is no reason to suppose that they wouldn’t repair your camera past the one year.

 

I am quite sure that there was and still is a difference between Nikon and Fuji due to the difference in their corporate structure. As far as I know you can even send the camera to repair in another country (of course shipping is more expensive).

 

Anyway, when in doubt, call them 

 

http://warranty.fujifilm-digital.com/contact

Link to post
Share on other sites

If B&H is reputable, buy it. For my experience, at least here where I live, the importers, during the years, earned two or three bunch of money with the "story" of the warranty. Then, finally, with the EU laws, many shops and websites started selling the same stuff, always with one or two years warranty, at half of the price.

Link to post
Share on other sites

 

 

Here in Indonesia, they are charging twice as much for services for cameras and lenses not bought in the country.

 

Sent from my MI MAX using Tapatalk

My grey market 27mm was €180. I gladly took the risk of having to pay for service. I have had it for over a year now, and no sign of any problems so far.

Link to post
Share on other sites

Grey market doesn't mean there is a greater chance for problem.  It isn't the same as a refurbished item.  It simply has to do with the flow of product for suppliers/country and the joint effort of warranty support to promote buyers purchasing in their own country.  (at least how I understand it)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • Thank you. I will research it.
    • Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
    • How does one make sure that Fuji's image correction is turned on to correct barrel and pin-cushion distortion on a GFX 100 or GFX100S when using the GF20-35? Is it only applied to the jpegs and not to the raw files? (I was surprised to discover the barrel distortion on the GF 35-70mm lens.) I normally shoot in raw with jpeg back-up and use the raw files, which I convert either in Affinity Photo 2 when editing with that program or in Raw File Converter Ex 3.0 by Silkypix if I wish to process the image in Photoshop CS6. (Adobe DNG is also a possibility.) Thank you for the help. Trevor
×
×
  • Create New...