Jump to content

Stuck Wasabi Batteries


Therapeuo63

Recommended Posts

I discovered that the Wasabi batts get stick in my X-Pro1.  I can get them out using a piece of tape so they are not stuck too firmly.  I decided to sell my Pro1 (not because of this) and ordered a minty used X-T1 today.  Does anyone know if this problem also occurs on the X-T1?  I'm trying to avoid the high price tag of the Fuji OEM batteries so if anyone is using a different aftermarket batt what would you suggest?

 

Thanks

Link to post
Share on other sites

Guest welshkc

It is because the batteries have swollen.  Throw them away before they ruin your camera.  If you set them on a flat surface and push the corners, I bet they will rock.  You can keep buying the cheap batteries, I do, but check them for issues like swelling and ditch them when it happens.

 

Ed

Link to post
Share on other sites

Buy cheap and you always end up buying twice!

 

Far too many moans about Wasabi batteries to even consider buying then, thank goodness they are not widely available in the U.K.

 

Where is the logic of spending loads to buy a top notch camera and then scrimping and buying cheap batteries, doesn't make sense to me!

Edited by Mike G
Link to post
Share on other sites

I've used Wasabi batteries in my X-T1 and X-E2 when without any issues. When I got my X-Pro2 I noticed an occasional freezing of camera (could just have been the issue with the old firmware) and it seems the charge does not last as long. I haven't used them as much as I had bought extra Fujifilm ones now. I used a Wasabi one in my X-Pro2 over the holidays for photos of family opening gifts and did not have any issues with it so it is difficult to say if they were the cause of the freezing.

Link to post
Share on other sites

Where is the logic of spending loads to buy a top notch camera and then scrimping and buying cheap batteries, doesn't make sense to me!

For the record; third party does not have to mean cheap or low quality. If Duracell ever decides to bring out Fujifilm compatible batteries, I'll be first in line to order them, based on my experience with them when I used Canon cameras. They were not that much cheaper than the OEM batteries, but held a better charge, and showed far less ageing.

 

Unfortunately Duracell does not offer a NP-W126 substitute. Or at least did not when I last checked. I settled on Hähnel because they also have a good reputation, and have a clear warranty statement.

 

Edit: just Googled, and it seems they do offer NP-W126 batteries now indeed! Whenever my Hähnels get worn out, I know what I will choose.

Edited by johant
Link to post
Share on other sites

Had a similar problem but with my Watson replacement, worked fine in my xt-10 but when I got the xt-2 I used the Watson and had difficulty removing it, I figured it was due to swelling or slightly smaller battery compartment on the xt-2, still using it on the x-t10 with no problems

 

Sent from my Nexus 6P using Tapatalk

Link to post
Share on other sites

Batteries will all, at some point, get damaged by the recharging cycles, also original NP-W126 will ( run a search on line, several reports) albeit possibly later than third parties batteries.

 

My macbook battery swell up too (original part) and nearly destroyed the computer from inside this has nothing to do with parts being original or not. It has to do with the way some batteries respond to aging and repeated loading cycles.

 

Indeed even Fuji batteries are third parties batteries, Fuji doesn’t make them! They buy them under tighter specs than other makers but they are batteries like all others.

 

Duracell is a well known name but there is nothing in that name to suggest they are any better than other makers. They too will get damaged.

 

As soon as you notice bulging discard (dispose in appropriate manner) and replace.

 

 

As for batteries, quality varies greatly, have you read this?

 

http://www.fujirumors.com/tested-third-party-fuji-batteries-inflated-capacity-values-some-batteries-almost-fraud-and-the-winner-is/

Edited by milandro
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Is there a way to keep your menu selection on the last option you used? For example.  When I select MENU the cursor defaults to MY Menu.  I scroll up to IQ settings, make a change, and return to shooting. When I press the MENU button again the cursor is back to MY Menu.  I really want it to stay on the IQ setting I was last using (or any other Menu setting). It's a PITA to keep scrolling up and down, back to the previous setting.  (Note.  My Canon Menu retains the position of the last option I was using). Thanks in advance for any help.
    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • Im not partal to any brad, just opted to try these based on apparent price / performance.  I'm always looking for best bang per buck, hence Fuji I guess - haha Reliabilty does not concern me, as I always shoot to two cards for pro work (and burst shooting is not a part of that). Made sense for me to get the cheapest / fastest CF cards for hobby shooting.     I just got a Sabrent Rocket V60 512GB cheep (as the back-up card).   As long as neither of these freeze the camera I hope its a cheep solution for my needs. (AB AV Pro SE 512Gb and Sabrent Rocket V60 512GB).  Half a gig of redunat storge for $200USD is something I can live with. (Especially considering I can bust the hell out of the Anglebird). Cheers, Tomek
    • Would using an external charger be of benefit to the batteries life? I appreace it can be faster, but I doin't mind pluging in the camera over USB to charge. Does charging via the camera do as good a job as lets say the fuji's own external charger? Does the camera stop charging once the battry is full and not over charge? I couldn't find these deatails in these forums or in the manual. Thank you!   Image below shot on X-T2 in a sunny studio.  

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • It is really easy to find out if the wifi is on. Your computer or tablet or cell phone will have a network settings dealing with wifi, bluetooth, ethernet or “other”. Open that up and go into the section for wifi, and take note of which networks are listed. Turn on the camera and keep watching the list of networks. If your camera’s wifi is turned on, a new network should suddenly show up in your computer/tablet/phone’s network listings. Now go into the camera’s menus and start a wireless connection (the x-app or camera remote app can help you with this). You should see a network show up now. It is not hidden because it has to be visible so that your computer/tablet/phone can join the camera’s network to transfer images. Turn the camera off and that network should disappear. Turn the camera back on and see what happens.
×
×
  • Create New...