Jump to content

DOWNLOAD NOW :: Massive FUJIFILM FIrmware Updates :: Bug Fixes + Improvements for X-series cameras / lenses!

Patrick FR

By Patrick FR
in General Discussion

 Share

Recommended Posts

JaapD Contributor

JaapD

Posted
Posted

When I want to upgrade all my different cameras and lenses, can I then put all upgrade files in one go onto an SD card, then put it into the camera and let the camera decide what file it needs (i.e. FWUP0001.DAT, FWUP0005.DAT, XFUP0018.DAT, etc)?

Link to post
Share on other sites
milandro Grand Master

milandro

Posted
Posted

I don’t know it it is possible but I really think it is best to do this one by one, why would they, otherwise, tell you to do this on a formatted card?

 

If the camera could, without any problems, chose the software it needs among all the data on the card without any interference formatting wouldn’t be necessary.

 

I think that it is best to do all operations one by one. Remember that if you camera gets mixed up with conflicting data you might not be able to restore its functions alone for the same reason that downgrading is not possible.

Link to post
Share on other sites
JaapD Contributor

JaapD

Posted
Posted

Thanks for your reply. It is of course required to use a formatted card, otherwise the card won't be readable in the first place. It is not mentioned that only one file should be put on the card. Since all upgrade files have their unique name (i.e. FWUP0001.DAT, FWUP0005.DAT, XFUP0018.DAT, etc) I expect the camera kwows what file to select for upgrade.

 

When I want to upgrade all my different cameras and lenses, can I then put all upgrade files in one go onto an SD card, then put it into the camera and let the camera decide what file it needs.

 

What do you think?

Link to post
Share on other sites
milandro Grand Master

milandro

Posted
Posted

For the reasons that I’ve mentioned before, I would certainly err on the side of caution and do the updatedsone by one.  What have you got to lose? A bit of time?

 

The number of things that could go wrong are very high (certainly if you are upgrading a number of lenses) and the, even remote, possibility that you would then have to send your camera for service to reupload all the software frankly speaking would scare me.

 

What is the benefit? Saving few minutes? Not worth the risk!

Link to post
Share on other sites
mdm Experienced

mdm

Posted
Posted (edited)

Thanks for your reply. It is of course required to use a formatted card, otherwise the card won't be readable in the first place. It is not mentioned that only one file should be put on the card. Since all upgrade files have their unique name (i.e. FWUP0001.DAT, FWUP0005.DAT, XFUP0018.DAT, etc) I expect the camera kwows what file to select for upgrade.

 

When I want to upgrade all my different cameras and lenses, can I then put all upgrade files in one go onto an SD card, then put it into the camera and let the camera decide what file it needs.

 

What do you think?

 

Yes, you can. I do it exactly this way. All DAT files for camera(s) and lenses should be in the root directory of SD card. That's it.

Edited by mdm
Link to post
Share on other sites
gordonrussell76 Collaborator

gordonrussell76

Posted
Posted

Just for people information.

 

I did once put the wrong firmware for the lens I was updating on the card ( I was doing them one at a time, but I got mixed up) and when I tried to install that firmware on the wrong lens the camera came up with a message saying. Firmware not found or firmware incorrect. It would not let me use the wrong one.

 

Maybe some comfort to those planning on the do it all at once approach. Me personally I am with Milandro, its probably not neccessary but any step I can take to stop me from bricking my camera I will take, its not that much work. I upgraded the camera and 4 lens just now and it took me 15 minutes.

 

G

Link to post
Share on other sites
milandro Grand Master

milandro

Posted
Posted

Cheers!  :)

 

It is obvious from previous reports concerning malfunctions following updates that, despite the camera having protection against our behavior, things may and indeed do go wrong.

 

http://www.fuji-x-forum.com/index.php?s=3dda3d5b748850e5d567273a76d8c4ba&app=googlecse#gsc.tab=0&gsc.q=not%20working%20after%20update

 

So, erring on the safe side of updating is something which MIGHT prevent malfunctions generated by potential conflicts. The more variables you introduce the more possibilities there are for things to go wrong.

 

IF... things go wrong, sometimes it will be possible to try re-installing the firmware hoping that the camera will complete parts of the firmware which weren’t copied.

 

But this doesn’t always work.

 

IF... it doesn’t I am facing sending the camera away for several weeks ( lab is in Germany we don’t have one in the NL) where they will do the overwriting of the firmware with a turn around not inferior to 6 weeks.

 

AS I said.

 

Err on the side of caution!

Link to post
Share on other sites
Aswald Mentor

Aswald

Posted
Posted

Thanks for your reply. It is of course required to use a formatted card, otherwise the card won't be readable in the first place. It is not mentioned that only one file should be put on the card. Since all upgrade files have their unique name (i.e. FWUP0001.DAT, FWUP0005.DAT, XFUP0018.DAT, etc) I expect the camera kwows what file to select for upgrade.

 

When I want to upgrade all my different cameras and lenses, can I then put all upgrade files in one go onto an SD card, then put it into the camera and let the camera decide what file it needs.

 

What do you think?

Yes, you can.

Link to post
Share on other sites
Griff Rookie

Griff

Posted
Posted

Well 3 cheers to Fuji for the recent updates, how good is this. Never had as much support for any other brand I've had, I cannot fault the Kaizen.  I did notice that my 50-230 MkI didn't get an update but it doesn't worry me at all. I guess that the innards are not able to be adjusted. Still praise for Fuji for Kaizen. 

Link to post
Share on other sites
Mike G Experienced

Mike G

Posted
Posted

When I want to upgrade all my different cameras and lenses, can I then put all upgrade files in one go onto an SD card, then put it into the camera and let the camera decide what file it needs (i.e. FWUP0001.DAT, FWUP0005.DAT, XFUP0018.DAT, etc)?

I tried to do that and I got a card error message, so it was back to one at a time!

Link to post
Share on other sites
Aswald Mentor

Aswald

Posted
Posted

Updated the XPro1 an 55-200. OIS lateral "freezing" during initial pre focus seems to be slightly briefer. Haven't really checked out other parts. This was my only complain with the lens. Everything else feels normal.

Link to post
Share on other sites
r_e_m Newbie

r_e_m

Posted
Posted (edited)

My XT1 is v4.3 and 18-55 is v3.12. 

So is mine but the Fuji update site lists the new FW as v4.31 and v3.20 but the 'update' is the same as the existing FW.

 

 

Edit: All sorted, seems I had the previous version of the FW lurking on the computer and as the updates use the same file name it was the old file that was copied onto the sd card.

 

Note to self, tidy up old FW after use!

Edited by r_e_m
Link to post
Share on other sites
JBoris Newbie

JBoris

Posted
Posted

:mellow: OK, I've tried 3 times now to upgrade to the new XPro2 BODY firmware.

Each has resulted in the error message "No firmware found in slot 1".

I've reformatted the card each time,  used another (new) card after the first attempted failure, downloaded the firmware fresh again each time using the FujiFilm link (after trashing the previous download), and I'm still getting the same error. This is not my first rodeo.

Anyone else on a Mac having this issue?

Link to post
Share on other sites
Ilya_p Explorer

Ilya_p

Posted
Posted

When I want to upgrade all my different cameras and lenses, can I then put all upgrade files in one go onto an SD card, then put it into the camera and let the camera decide what file it needs (i.e. FWUP0001.DAT, FWUP0005.DAT, XFUP0018.DAT, etc)?

yes you can do that, i did it exactly that way. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      How does one make sure that Fuji's image correction is turned on to correct barrel and pin-cushion distortion on a GFX 100 or GFX100S when using the GF20-35? Is it only applied to the jpegs and not to the raw files? (I was surprised to discover the barrel distortion on the GF 35-70mm lens.) I normally shoot in raw with jpeg back-up and use the raw files, which I convert either in Affinity Photo 2 when editing with that program or in Raw File Converter Ex 3.0 by Silkypix if I wish to process the image in Photoshop CS6. (Adobe DNG is also a possibility.) Thank you for the help. Trevor
×
×
  • Create New...