Jump to content

Mitakon, Metabones, Roxsen, Camdiox, focal reducers, share your experiences.


Recommended Posts

  • 1 year later...

hi guys

 

I bought a m42 speed booster from ebay. this one here ;

 

http://www.ebay.com.au/itm/262473023050?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

I paired it with a helios 44-2 and a cosinon 55/1.4

 

At wide apertures, it is incredibly hazy and washed out It works ok from f/4 onwards.

 

I'd basically say it's a waste of money. When I put the lenses on the camera with a simple adapter, the lenses jump to life and for example the cosinon which was basically unusable on the speed booster is actually really good at f/1.x

 

So, is there any way to get these lenses speed boosted with decent quality on the X mount? I was thinking maybe getting a nikon or canon speed booster from metabones and then using an adapter to get it connected to that speed booster.

 

Any ideas would be really appreciated.

 

cheers

Link to post
Share on other sites

 Zhongyi LensTurbo II m42 w/ Helios 44-2.  I have three copies of the Helios. one was NOS, but the helicoid is all dried up.  I need to research how to repair this myself, I recall some vids out there.  any one have success?

 

I sent away a Jupiter 8 to get professionally done and it's exquisite, but I think I am over spending more money to service a lens that what I paid for the lens  <_< 

Edited by r_kt
Link to post
Share on other sites

 Zhongyi LensTurbo II m42 w/ Helios 44-2.  I have three copies of the Helios. one was NOS, but the helicoid is all dried up.  I need to research how to repair this myself, I recall some vids out there.  any one have success?

 

I sent away a Jupiter 8 to get professionally done and it's exquisite, but I think I am over spending more money to service a lens that what I paid for the lens  <_< 

 

https://www.youtube.com/channel/UCtjL20VhUKWrntdWe6TVxGw

 

This guy. I used his videos to help me repair a Jupiter 9 lens that I picked up cheap. I've also purchased several lenses from his eBay shop and have been very happy with them.

Link to post
Share on other sites

sometimes the grease is simply too cold and slowly warming up the lens will loosen it.

 

Although opening ( and closing!) the focussing barrel of a lens like this is not rocket science,  a you can see from the videos, it is not THAT easy.

 

If you aren’t technically inclined it maybe be a challenge. Since you need an adapter anyway, you may use one with an helicoid and use it INSTEAD of the helios focussing helicoid.

 

The cost of one of these adapters ( and you need an adapter anyway)  will be certainly less than sending the lens to have it cleaned ( about $25).

 

51FNsuG4e%2BL.jpg

Edited by milandro
Link to post
Share on other sites

  • 4 weeks later...

I personally am very happy with the Zhongyi lens turbo II because they are a well known brand and made well, don’t have the hot spot in the center and perform very well.

 

The RJ Brand speed booster might be made by the same production line but it is an unknown quantity. I have seen some tests which suggest that they are good.

 

 

 

 

You can find these Zhongyi lens turbo II for $149 or less on Ebay.. They cost €229 in shops in the NL.

 

I have bought two (one M42 to FX and a Canon EF to FX) currently I have only the second because I decided to use M42 lenses without any focal reducer while using the Canon on my Petzval 85mm.

 

 

 

Where are you going to buy them for €100? 

Link to post
Share on other sites

I personally am very happy with the Zhongyi lens turbo II because they are a well known brand and made well, don’t have the hot spot in the center and perform very well.

 

The RJ Brand speed booster might be made by the same production line but it is an unknown quantity. I have seen some tests which suggest that they are good.

 

 

 

 

You can find these Zhongyi lens turbo II for $149 or less on Ebay.. They cost €229 in shops in the NL.

 

I have bought two (one M42 to FX and a Canon EF to FX) currently I have only the second because I decided to use M42 lenses without any focal reducer while using the Canon on my Petzval 85mm.

 

 

 

Where are you going to buy them for €100? 

 

Im going to buy on ebay.

 

The problem with Zhongyi is that they don't have Canon FD adapter, only EF, Nikon and M42 - so none of them will fit my lenses.

For FD on ebay there are only this "RJ", Metabones and no-names (you are right, most probably the same as "RJ")...

And Metabones is TOO expensive

 

Anyway, will post some tests afterwards. Thank you for help

Link to post
Share on other sites

I didn’t know that Zhongyi doesn’t make a Canon FD > FX focal reducing adapter, you may ask them because they certainly have that mount for other cameras ( and might be able to do this special order for you).

 

try to ask them first, before you order

Edited by milandro
Link to post
Share on other sites

  • 1 month later...
  • 4 weeks later...
  • 5 months later...

I use the Camdiox EOS-Fuji X one and then use various adaptor rings that I've had since my Canon days. I haven't had any major issues with it yet. It does sometimes have the blue dot effect if you point it directly at a strong light source but that's not something I tend to do very often anyway. 

 

I have some example shots below that I've taken with an X-T1 and various lenses.

 

http://www.altphotography.com/park-life/

Link to post
Share on other sites

  • 7 months later...

Use the Metabones SPeedbooster Ultra with aperture ring for Nikon G and the Zhongyi M42 Lens turbo II. Have most of the fast old nikkor primes and a lot of great M42 lenses. The Zhongyi surprised me in good way. It rockks with the Helios 58/2, Fujinon 100mm f2.8 EBC and the Carl Zeiss 180mm f2.8 Sonnar. The Metabones SPeedbooster Ultra is just a tad sharper. But be carefull with using long telephoto lenses on the Metabones. My 400mm f3.5 Nikkor vignettes like crazy on the Metabones. The Metabones makes some of my old nikkor primes render nicer and sharper than on my Nikon Df: especially the 20/f4 ai, 35/1.4 ais, 55/1.2 pre-Ai, 85/1.4 ais, 105/2.5 ais, 105/1.8 ais, 180/2.8 ais and 200mm Nikkor Q f4

Link to post
Share on other sites

  • 1 year later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Posts

    • I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Hy there When Im using the fan001 on the XH2s and I flip the LCD Screen vertically by 180 degrees then the image flips vertically, what is good but it also flips horizontally. The clean feed on HDMI is not flipping horizontally but its also flipping if the HDMI output info display is on. When I unmount the fan then the image flips only vertically. My firmware is updated to the latest version. Any ideas if there is a fix for that?
    • In reply to the original question, it all depends on what you mean by infrared.  If you mean "see thermal information", then I agree with the comments here.  However, if you mean near-infrared, the X-T4, or basically any digital camera can be modified to "see" it.  Check out Lifepixel.com and Kolarivision.com for more info. As regards lenses, I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • No - I don’t think so - it means you can take pictures if you remove the lens completely - but I’m not sure that is a problem
    • I bought a manual lens over xmas and it took me a while to find the "shutter w/o lens" function in the menu settings.  So far I haven't found a way to either put that on the Q menu or marry that setting to one of the 4 custom modes.   Am I missing something? Is there a problem if I just leave that setting enabled even when the OEM auto lens is in place? tia
×
×
  • Create New...