Olaf W.

You can‘t AFAIK

Do you use a lens hood?

Can you specify which items are greyed out?

You have to tell the camera to use a different phone. IIRC it's the down button in the WiFi menu

If you set the camera to RAW plus JPG (use „fine“ setting for JPG) and a monochrome mode, you‘ll get a black and white JPG and a coloured RAW. You can use the RAW file for different kinds of development inside the camera or with external software.

I'd like to see some example photos taken by this combination

Becoming a "Pro" photographer depends on your photography skills rather than the gear. And, you don't mention if you want to shoot people or other motives in your studio. It's quite hard to give a recommendation without more information. Did you use any cameras before?

Found it here: https://www.fujifilm.com/support/digital_cameras/software/firmware/procedure_flash.html Just attach the flash, turn it on, then turn the camera on with the display button pressed

Maybe someone with an X-H1 could test to lock the menu/cursor buttons (long press on MENU/OK). This disables the Q button on my X100F. To unlock the buttons use the same procedure.

Great idea - what camera do you use?

I think „Auto“ follows „22“

Guess you have to select the lens model rather than the camera. The X100 models simply show up due to their built in lenses

An interesting preview of the XF16-80mm lens by Jonas Rask

These lenses are not built for manual use, unfortunately. They need the electronic connection with the camera to control aperture and focus.

Are you sure your latest X-T2 is genuinely Fuji and not some fake?

Rebooting the device and the camera (remove the battery and put it in again after some seconds) might help. If it doesn’t, do you have another device to test the transfer?

Did you have this problem from the beginning or did it work at some time? Did you try to reset your wireless connection (remove device, reconnect)?

Unfortunately, Photos will not detect them as duplicates. In my experience it is the best way to delete the photos in Photos (you can recycle them from the bin for 30 days) and start a new import. Personally, I prefer to use a card reader and put the photos into dedicated albums when importing.

No much to see, I'm quite out of ideas. You could try to use the touch display to focus. Did the camera ever work correctly? What is the distance between the camera an the subject, did you test different distances?

By pressing the button AF-L on the back. You can configure in the menu if the button has a toggle function (on/off) or has to be kept pressed. Could you upload a photo of your camera's display? Maybe we find something. Was the camera / lens working at some time or do you have a new one?

Some more wild guessing - did you activate the focus lock? EL means "exposure lock" and flashes if half press the shutter.

And check if the lens is attached properly

I had a similar effect sometimes with my XT2, but it helped to toggle power or switch the front focus button to M and back to S (or C). Another reason could be that the the object is too close to the lens.

The little box is in the middle of the display? Does it change to green when you half press the shutter button?

Did you check if you shifted the focus point to a side position?