Jump to content

Billingham bag - Musty smell.


Recommended Posts

Hello everyone.  I bought a Bellingham bag off eBay. Not sure of model; its not on website nnow, so I guess it's a "Vintage". I'm unsure as to how it was previously stored but it came with a very strong musty smell.  I have aired it, Febrezed it and let it lie indoeers with all the zips open. There is a small smell of mustiness still. I would welcome your comments on how to cure the smell once and for all. Its a beautiful bag and still want to use it as long as it doesn't affect my equipment (Xpro2 and lens')

Link to post
Share on other sites

unfortunately this is probably the reason that the seller got rid of the bag in the first place and you would have been better served by taking full advantage of the ebay guarantee and sending it back. Since you seem to have it treated already with febreze I can only suppose that the terms of the guarantee have expired by now.

 

Because of my other interest, saxophones, I am very familiar with the musty smell of old cases. Febreze is ineffective most of the times and at very best changes the musty smell into the febreze smell. I am not sure which is worse .

 

Notoriously the musty smell is near impossible to get rid of.

 

Anyway, the ultraviolets in the sunlight seem to be working better than anything, so exposing the bag (inside out too) to abundant sunlight might do the trick. Some people make use of baking powder ( sodium bicarbonate) which supposedly would absorb the smell but I really don’t see how to treat a bag, especially not one which will then contain a  camera (even if you hoover it some crystals might stay behind in the bag and come back to haunt you later on). 

 

Carpet foam cleaners are not bad too but often do the same as febreze and simply cover one unpleasant smell with another.

 

Anyway, the musty smell comes from mold , ask yourself if you want to risk to keep your photographic equipment in a place which could transfer mold from the cloth to a lens. Personally, I wouldn’t risk it.

Link to post
Share on other sites

Put it through your washing machine!, take off all removable parts, I put my old Hadley through the washing machine a couple of times with no problems.

 

Just one more reason never to buy from E Bay! Hope it didn't cost you a lot?

 

By the way I presume you mean Billingham?

 

You could try asking them for advice, what model is it ?

Edited by Mike G
Link to post
Share on other sites

Thanks for the info. I cannot determine what type it is; its not online and it appears to be older than the recent Hadley range. I cannot see any mould at all; just the musty smell.  It wasnt a deal bbreaker and I have eliminated most of it with airing it outside in sunny weather. its just the residual smell I'm trying to get rid of.

Link to post
Share on other sites

Mold is not necessarily visible and often clothes which somehow have got wet and were kept in a warm but damp place, smell moldy, even if there is no mold (not mould by the way) to be seen. The smell in itself is the proof of the persistence of the fungus hyphae, even if invisible.

 

The same fungus which might colonize your lenses too. I personally wouldn’t take the risk. But maybe all your lenses are WR and they would be rather more impervious to fungus.

 

Good luck.

Link to post
Share on other sites

Even though I wouldn't recommend washing leather but since you may not be able to use it anyway, I'd say wash it, dry it out in the sun and use it for something else. Hopefully something not valuable or sensitive to mold. Adding natural rice vinegar will help to a great extent, especially with the smell and is safe on most fabric and leather.

 

On leather and natural fiber fabric, once infected and colonized, mold is impossible to get rid of. The moment the environment is suitable, it will grow again.

Link to post
Share on other sites

Do a mix of 2 part of bicarbonate of sodium and 1 part of per-carbonate of sodium mix in warm water and soak the whole bag in for a least a night. Use table spoon for measures, it will be sufficient enough.

 

After drying if it still smell still persist, do the same mix in the wash machine, let it run normally for colored textile, that should do the trick.

 

At least that's how I get rid of my pets urine on their blankets, it still has to fail me.

Link to post
Share on other sites

Mold is an infection and it comes back because fungus, yeasts and things like these are the toughest organisms on earth, able to stay dormant when things are dad and to come back as soon as conditions allow it.

 

Yes, definitely pass. Mold is something you just can't get rid off, no matter how often and how well you wash it, it will be back.

Link to post
Share on other sites

  • 2 weeks later...

Thanks for all your help Gentlemen. I persevered with the problem for a short while and then decided enough was enough. I have sent the bag back to the seller (via eBay) for a refund. I bought the Billingham 550 for a giveaway price and it smells as sweet as a nut.  It now holds 2 x bodies, 3 lens', x 2flashguns and assorted paraphernalia.  Your advice has been very helpful.

Link to post
Share on other sites

Thanks for all your help Gentlemen. I persevered with the problem for a short while and then decided enough was enough. I have sent the bag back to the seller (via eBay) for a refund. I bought the Billingham 550 for a giveaway price and it smells as sweet as a nut.  It now holds 2 x bodies, 3 lens', x 2flashguns and assorted paraphernalia.  Your advice has been very helpful.

 

That's great! Enjoy yr new bag. Always one of my favorite!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Is there a way to keep your menu selection on the last option you used? For example.  When I select MENU the cursor defaults to MY Menu.  I scroll up to IQ settings, make a change, and return to shooting. When I press the MENU button again the cursor is back to MY Menu.  I really want it to stay on the IQ setting I was last using (or any other Menu setting). It's a PITA to keep scrolling up and down, back to the previous setting.  (Note.  My Canon Menu retains the position of the last option I was using). Thanks in advance for any help.
    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • Im not partal to any brad, just opted to try these based on apparent price / performance.  I'm always looking for best bang per buck, hence Fuji I guess - haha Reliabilty does not concern me, as I always shoot to two cards for pro work (and burst shooting is not a part of that). Made sense for me to get the cheapest / fastest CF cards for hobby shooting.     I just got a Sabrent Rocket V60 512GB cheep (as the back-up card).   As long as neither of these freeze the camera I hope its a cheep solution for my needs. (AB AV Pro SE 512Gb and Sabrent Rocket V60 512GB).  Half a gig of redunat storge for $200USD is something I can live with. (Especially considering I can bust the hell out of the Anglebird). Cheers, Tomek
    • Would using an external charger be of benefit to the batteries life? I appreace it can be faster, but I doin't mind pluging in the camera over USB to charge. Does charging via the camera do as good a job as lets say the fuji's own external charger? Does the camera stop charging once the battry is full and not over charge? I couldn't find these deatails in these forums or in the manual. Thank you!   Image below shot on X-T2 in a sunny studio.  

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • It is really easy to find out if the wifi is on. Your computer or tablet or cell phone will have a network settings dealing with wifi, bluetooth, ethernet or “other”. Open that up and go into the section for wifi, and take note of which networks are listed. Turn on the camera and keep watching the list of networks. If your camera’s wifi is turned on, a new network should suddenly show up in your computer/tablet/phone’s network listings. Now go into the camera’s menus and start a wireless connection (the x-app or camera remote app can help you with this). You should see a network show up now. It is not hidden because it has to be visible so that your computer/tablet/phone can join the camera’s network to transfer images. Turn the camera off and that network should disappear. Turn the camera back on and see what happens.
×
×
  • Create New...