Jump to content

Recommended Posts

Hi,

I have a question regarding the use of the 2 card slots. If the slots are assigned as backup, so that images are recorded on both cards

(CFexpress and SD). The cards will most likely have different capacities, the cfexpress having larger capacity than the SD. What happens when

the SD card is full, but the cfexpress is only partially filled ?

Can the SD card be replaced with another SD card, and shooting continue.

Does anybody know ? many thanks for any replies,

Robert

Link to post
Share on other sites

  • 1 year later...
13 hours ago, ronphotohawaii said:

So does the CF Express take the initial data from the camera and then later on the SD card catches up? I've been using CF Express only but it's a pain in the butt to use a card reader all the time. I'd rather just use a secondary SD card for compatibility issues, but would my buffer rate be effected?

Are you writing in backup or sequential mode?

If you are writing in sequential mode then its going to write first to the primary card and then switch to the secondary card. The speed of writing from the buffer to the card would be slower when the primary card is full.

If you are writing in backup mode then things will slow down if you are shooting bursts AND the bursts fill the buffer - at that point write will be at the speed of the slower card.

Link to post
Share on other sites

Backup mode. What a silly idea to put two card slots in the camera but you can't backup unless you're willing to sacrifice speed. i know Fujifilm isn't the only company that does it but it's a poor design choice.I was hoping it would zip to the CF Express and then copy over at a slightly slower rate to the SD Card

But thanks for the reply. It's good to know.

Link to post
Share on other sites

  • 2 months later...
On 2/18/2025 at 7:38 PM, Greybeard said:

Are you writing in backup or sequential mode?

If you are writing in sequential mode then its going to write first to the primary card and then switch to the secondary card. The speed of writing from the buffer to the card would be slower when the primary card is full.

If you are writing in backup mode then things will slow down if you are shooting bursts AND the bursts fill the buffer - at that point write will be at the speed of the slower card.

In backup mode, your write speed is only as good as your slowest card, especially during bursts

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Years ago I carried my Canon film cameras hyperfocused, but now with Fuji X equipment the autofocus works so well hyperfocusing is a thing of the past. I have a Fuji XF 14 mm f/2.8, one of the older lenses in the line, and it has depth of field and focus distance marks (and an unusual clutch to put the lens into manual versus automatic focusing mode). But I've never even tried hyperfocusing it. None of my other lenses have the markings for this. Could this be a non-issue?
    • Hi All, Purchasing xs20 in 2025 is a wise decision? Fujifilm launched offers to their most of the products in last few months, so many of the photo enthusiast are planning to use this opportunity. But the below rumors are still in the internet and no one addressing it properly.  I hope this forum can answer, how they feel about xs20 in 2025.  1. XS20 users still facing the over heating issue after upgrading to the latest firmware and shooting outside during hot weather is disaster due to overheating.  2. Over heating occurs during the videography, thats understandable, overheating is a serious concerns during the photography, navigating through the menus, simulations. 3. This camera is not suitable for those who lives in hot climate.
    • It would be helpful for the OP to indicate what imaging software as well as the OS (Win/Mac) they are using. We are assuming it is Lightroom Classic. If it LrC, there is an option in the settings/preferences > Presets > Raw Defaults to choose "Camera Settings", which will apply whatever settings were set on the camera when the image was taken to the image you see on the computer screen.
    • I would like to know what photos with 50000 ISO give, with the Z6 it is more or less correct then pass to post processing and it disappears, I have no idea what this can give with Fuji
    • Bonsoir, Merci le retour d'information. Concernant la publication en anglais ok je le ferai avec Google traduction, néanmoins tout ce qui est publié sur votre forum est en français. J'aimerais comprendre 😂
×
×
  • Create New...