Jump to content

Fuji processing techniques ! help ! *PHOTOSHOP n LIGHTROOM*


Recommended Posts

i am fairly new to post processing techniques and quite haven't understood how to edit faces in portraits.

 

I believe frequency separation is the most common starting point to have beautiful faces,

And also dodge n burn is used to make a more dynamic look by brightening out light areas and darkening out dark areas.

But i have never achieved the look where the face complexion looks so crisp with visible pores. Something like this..

 

EXAMPLE : https://500px.com/photo/102954179/lisa-marie-by-julian-marochow

 

 

 

 

 

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

And this is my photo (XT1 18-55) So, where am i doing it wrong ?

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Edited by rwker
Link to post
Share on other sites

I think 56mm lens vs zoom is one of the factors. 56 is made for this kind of work (headshots). It is great specialized lens. If you look at her pictures taken with 35mm 0r 60mm, they just don't have that crisp look. Neither pictures with 90mm when whole body is in the frame. That lens is amazing when used properly.

It looks to me that you did a little bit heavier jpg processing (be it in camera or in post production) vs careful nondestructive RAW conversion.

Overall your picture is not bad.

Also, lighting. It needs to be more contrasty, coming from steep angle to accentuate texture (in this case pores).

I don't see a lot of D&B, some contrast is added in post, but it's mainly skillful lighting.

There is some toning down and a bit of desaturation, to make colors subtle.

I've never found frequency separation to make a big difference in overall results, like I've never seen this difference working 16Bit vs 8Bit files.But, it won't hurt either. after all, it's just an action to prepare an image for FS.

Also, her light is controlled vs yours not being. You tried, but it's not. You added a reflector, or an additional flash in front low. Front light won't accentuate pores and lower angle will give horror like appearance.

But, these are small details, your picture is good on it's own.

Edited by Dook
Link to post
Share on other sites


 

He shoots mostly on his 90mm and he also has a subtle but crisp look to the skin textures.

 

 


 

He also has his 90mm that outputs the same look i want (crisp visible pores)

 

 


James also constanly switch between his 6d and XT1 to achieve that look and it seems his 6d does a better work at it(due to it being FF ?)

 

 

So my options is to get a prime lens like the 56mm or the 90mm with the help of good lightning techniques.

 

 

NON FUJI SHOOTER Dani Diamond with his 85 1.4 is so good at using natural light that his post processing always comes out good. Maybe it is all about the lens. Time to invest on a prime lens i guess. =)

Link to post
Share on other sites

So my options is to get a prime lens like the 56mm or the 90mm with the help of good lightning techniques.

 

Before spending $$$ for these primes I would attend some master class. It's cheap, it's usefull, it's interesting and it will answer your questions.

Edited by mdm
Link to post
Share on other sites

Before spending $$$ for these primes I would attend some master class. It's cheap, it's usefull, it's interesting and it will answer your questions.

 

sorry but there are no master class in my area,

Link to post
Share on other sites

  • 2 weeks later...

The difference was made when lighting your subject. Marochow is a master of soft light. Yours is taken in hard light and I see patches of hotspots all over the face. No amount of photoshop will get you what you need.

 

Learn lighting first. It will help you see natural light better too. Start with One Light 2.0 by Zack Arias. Best workshop I know and very cheap for what it is.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
    • How does one make sure that Fuji's image correction is turned on to correct barrel and pin-cushion distortion on a GFX 100 or GFX100S when using the GF20-35? Is it only applied to the jpegs and not to the raw files? (I was surprised to discover the barrel distortion on the GF 35-70mm lens.) I normally shoot in raw with jpeg back-up and use the raw files, which I convert either in Affinity Photo 2 when editing with that program or in Raw File Converter Ex 3.0 by Silkypix if I wish to process the image in Photoshop CS6. (Adobe DNG is also a possibility.) Thank you for the help. Trevor
    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...