Jump to content

X-T1 ... autofocus works different with different buttons ...


Recommended Posts

Anyone know why (or how to correct) the huge difference in autofocus speed between the ultra-fast shutter button and the sluggish AF-L button?  I like to use the AF-L to lock focus and then take images when my subject isn't moving (so I use it quite a bit in the type of photography I do).  But the difference in speed (I almost always use single point autofocus) is massive between the AF-L and shutter button.

 

If this is a known feature that is going to be 'corrected' in the FW 4.0 then awesome.  But if not ... it would be nice to bring it to the attention of Fuji.  :)

Thanks!

Link to post
Share on other sites

The AF-L button can be program to work differently. Check your menu setting user manual pg 61

"Use G AUTOFOCUS SETTING > INSTANT AF

SETTING to choose whether the camera focuses using single or continuous AF (P 78)."

Link to post
Share on other sites

Focussing wide-open with Instant-AF can take longer, but is more accurate. I'd actually welcome an option that allows me to set the shutter button focus to wide-open. Takes longer, but provides a more reliable DOF zone (at least with fast lenses). In any case, Instant-AF now also supports PDAF, which will increase the speed with firmware 4 (better PDAF sensitivity).

Link to post
Share on other sites

Thank you for the reply x-tc but I don't believe that is the correct setting for me question.  That will improve auto focus when in continuous focusing mode.  I'm always in single focusing mode and already had that option set in the menu.  For some reason autofocus speed differs (when in single mode) between the shutter release button and the AF-L.

Link to post
Share on other sites

I put my camera in manual and use the AF-L button to lock in focus.  I haven't noticed that it's any faster or slower, but it just works better for me to do it this way.  You just can't forget to push it again if you move your feet to zoom your lens.  Best part is that you don't have to keep recomposing because you've locked your focus and it's in manual.  I just hate having to hold the shutter halfway all the time.

 

Anyway, I prefer it.  You might give it a try.

Link to post
Share on other sites

For many years now, Instant AF has been a feature of (many) Fuji cameras, and it always behaved differently from focusing by half-pressing the shutter release button. This is by design.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • Hopefully these will help some. For quite a while now Apple has put stuff into their operating system so that you cannot yourself open the connected camera’s card and see the images, you have to use their or third party software to do that.
    • Thanks for the instructions:  I was doing up to 3 successfully but can't wait to get home and try  4 and 5 and report back. Cheers, John
    • Okay, just for completeness sake: 1.     The camera’s menu connection setting is USB CARD READER. 2.    The computer is turned on, booted and nicely operational. 3..    With the camera turned off, connect the camera to the computer using a known-to-be-good USB C data plus power cable (a data only cable should work as well, a power only cable will not work). 3.   The camera’s charging light may turn on. Turn the camera on. The back screen probably will show the USB symbol as well as the USB letters. 4.    Start up the Image Capture app and see if the camera’s name appears in the devices list. 5.    In the Apple menu, select ‘About This Mac’, click on the ‘More Info…’ button, and on the right hand side of the window that opens, at its bottom is a button called ‘System Report…’, click on it. A new window should open, the left hand side has collapsible dropdown listings, the first is called “Hardware’, within it is the USB listing, select that. The right side pane should give you listings of all the USB devices connected at that moment, one of them should say something like USB PTP Camera. Does either 4. or 5. work?
    • Thanks, Yes I knew about the USB issue in newer Macs and macOS but that is why I tested it with High Sierra as well. Also the fact that every other camera easily connects via USB direct with the camera - definitely points out the fact that it is a FUJI specific problem.  Furthermore - I remember being able to direct connect early last year. I rarely take the Cards OUT of the camera  these days. The weird thing is I can connect my iPhone 15 via USB-C to 100s and pull files directly - puzzling. Problem is FUJI rarely listens to anyone.    
    • Hi all, I notice that there are some focusing sound on my XF33 despite it being said as completely silent in many review. The focusing sound is kind of like stepping motor sound, and it only appears when I’m shooting photo. I try shooting near and far away and there is sound. However, it is completely silence when I shoot videos. Is it normal or do I need to change some of my setting? Or am I just getting a not too good copy haha. please assist me with the matter guys! Thanks!
×
×
  • Create New...