Jump to content

Recommended Posts

Complete noob here and never had to clean a sensor before. I've tried the rocket blower and spots show even at f/8 - quite terribly at f/11 and above. 

 

It seems lik the gel sticks aren't best for Fuji because of the sensor coating. Any particular product/brand to recommend, please share here :)

Link to post
Share on other sites

As pointed out in the other thread, you are only partially right about gel cleaners not being fit for Fuji, because apparently at least SOME brands have a version for “ normal” sensors AND a version for Sony-Fuji mirrorless camera sensors 

 

 

https://photographylife.com/product/sensor-gel-stick-for-sony

 

“........One of the best solutions for keeping your Sony and Fuji digital camera sensors clean! This sensor gel stick is designed specifically for Sony SLT and Alpha mirrorless cameras, but will also work equally well on Fuji mirrorless cameras. ..."

 

 

I am adding my post on the other thread here, although I am against double posting of the same content because someone might miss all of what I have found out by a little research on line

Link to post
Share on other sites

Well, you know the story of the guy who comes to fix your telly, he takes a little hammer and hits it in a corner, the telly works immediately and he says that it will be alright for another 5 years and then he asks $100.

 

You look at him as if he was crazy and say “ What !?, $100 for hitting the telly with an hammer, I could have done that! “ and the guy looks at you and says “ Ah! But unlike you, I knew where to hit it!” 

 

If you have a piece of gel that does the work and doesn’t wreck your camera, please, do it!

 

Nobody has to buy these gel sticks, it is after all not compulsory, so it is hardly a “ rip off" but what’s the alternative?

 

Having your sensor cleaned, in my neck of the woods, once only, would cost 2/3 of that amount of money.

 

 

 

So cleaning the sensor with a gel stick, appears to be rather simple affair and one that you can use at least 20 times. (both products talked about before are shown in the following videos I find the second video more explicative though)

 

@https://www.youtube.com/watch?v=wxKb_OqV7ng

 

@https://www.youtube.com/watch?v=fetJfPILU3o

 

Wet cleaners are interesting for some application where the gel stick might fall short

 

 

BUT...

 

 

Having learned that the Sony/Fuji/mirrorless cameras has a coating that is incompatible with the gel used for the Nikon sensor, what makes you think that the cleaner would be good for the Fuji sensor?

 

@https://www.youtube.com/watch?v=Vrahdr5eqqY

 

@https://www.youtube.com/watch?v=lFgSchx54og

Link to post
Share on other sites

I am perplex.

 

What does this Con-story have to do with some folks (several brands) selling a seemingly efficient product to clean camera sensor at a price that seems to disturb you?

 

Con-men have always been there and so have expensive products. 

 

You can buy the gel stick or not if you find it too expensive.

 

I don’t see the analogy with Mr. Martin Shkreli

 

All I know is that, if I have the sensor cleaned it is going to cost me 2/3 or as much (depending where I go).

 

The wet clean seems to me a little more dangerous and complicated.

 

It costs a bit less but it doesn’t come for free.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Thank you. I will research it.
    • Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...