Jump to content

Nikon SB-800 on XT-4

Hillsideshortleg
 Share

Recommended Posts

  • 3 months later...
David V Sinden Newbie

David V Sinden

Posted
Posted

Hi Hillsideshortleg,

I recently switched from Nikon to Fuji x cameras and use a lot of flash for portrait work (nearly always as fill-in on location).  Having researched it a bit, I ended up buying a Godox AD200 set up with an X1T-F transmitter.  Using this set up also lets me integrate my old Nikon SB-600 flash into it should I need to (though I suspect using the latter could only ever be in manual mode as a bit of research seems to indicate that nobody has actually got Nikon TTL to talk to Fuji TTL!)  That said, I have also started using large reflectors which are highly effective at bouncing back into selected areas!  

One of the other nice things about the Godox set up is that you can very easily integrate other Godox flashes into a set up and maintain TTL flash without necessarily needing extra receivers.  (So I am thinking of getting a small TT350 flash just for general, occasional use too.)  Coincidentally, a colleague who uses Canon has also switched to a Godox flash set up so we are also planning to pool our lighting set ups for occasional, even more complex set ups.  Lighting spectaculars, here we come...!!

Hope that helps!

David

Link to post
Share on other sites
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Giampaolo Masserano
      Looking for Full Frame lenses to adapt to GFX

      By Giampaolo Masserano · Posted

      I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...