Jump to content

Recommended Posts

HI there, i am a bit confused and hesitant. I am considering buying an X-T4 but seeing lots of people writing about them freezing amongst other issues. Also, having to continually update firmware seems like a pain especially given you need readers etc... What if you don't update ? Are all mirrorless like this ? No such hassles with DSLR's.  Can someone explain all this for me. Cheers.

Link to post
Share on other sites

First of all the upgrades are for the positive most times.  It's a Fuji thing.  Compared to other camera companies they are always updating and making their cameras better.

Not sure about the XT4 freezing issues but I'm sure they've been addressed in firmware.  However I use the XT1, XT2, XH1, and the GFX system and I've NEVER had an issue.  

Link to post
Share on other sites

You say lots of people, but this is probably just a tiny percentage of all X-T4s sold. All brands and all types of cameras, DSLRs included, have had a certain percentage of faults, even the very best ones. You see posts only from users who have problems, that distorts the perception of the issue. And in this instance, most of these issues are probably caused by memory cards. And you are covered by warranty. 

The upgrades are not that often, you can always read what they address and decide if you want/need to apply them. And you can wait for some time to see if anybody reports some problems before you do upgrade. They are a welcome feature of Fuji cameras because they have brought many new features and improvements to the various models, adding to their value for their owners. A card reader is a useful thing anyway, regardless of upgrades. I have never had any issues ever with any Fuji gear. 

Link to post
Share on other sites

Well I've decided to go with the X-H1 anyway. Its not going to kill my budget and i get ibis. Win win.

I'm going to get a trilogy of lenses that will cover my needs and wants.

The 10-24mm, 18-55mm & the 50-140.

 

Link to post
Share on other sites

Brand new cameras tend to end up with a flurry of firmware updates for bug fixes, once it gets some time out there things will settle down although Fuji tends to release more firmware updates than other makers, adding capabilities and updating to improve older bodies performance with newer lens releases.

The X-T4 is very new and still in the bug fix mode. 

The X-H1 was actually much worse for that when new, but has been around long enough to mature.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • Here is the solution to using the Eterna 55 file simulation LUTs in Davinci Resolve.   In general, do not use the FLog2C to film simulation LUTs as they are not supported by Davinci Resolve for two reasons: 1) Davinci Resolve does not support Fuji Gamut Color Space and 2) Davinci Resolve does not support FLog2C gamma.  Instead, use Flog2 which is supported by Davinci Resolve.  Here is an example.  Let's say that you want to use Classic Chrome simulation.  Do the following: Complete your color grade and use a CST to get to Rec 709. Add a node.  Use a CST to convert from Rec 709 to FLog2.  Output Color space is Rec 2020 and Outout Gamut is FLog2. Add a node.  Apply the FLog2 to Classic Chrome LUT Create a combination node from node in steps 2 and 3. Apply a Key to the combination node and adjust the Key Output Gain to get the amount of the combination node that you want applied. So that you do not have to do this over and over again, generate a LUT for the combination node.  Remember to turn off all other nodes before generating the LUT. Hope this helps others. Don  
    • Thanks for the insights. I think it's really hard to make a decision without having the two side by side! 
    • I don’t have the 23 f2 but I have read several times that it is considered a little soft at close distance, compared to the 23 f1.4 lenses. These will also focus at shorter distance from the subject, esp. the new one. So that might make a difference. The new 23 f1.4 LM WR  has better resolution, esp. in regard to the 40Mpix sensors, which you don’t have on the X-T2. What practical difference that makes for the value of the pictures one makes is disputable and subjective.  f1.4 will gather more light but with a smaller DOF, which may be desirable in some situations but not so in others, depends. If you like to shoot close ups, you will probably use higher f numbers to get a bigger DOF. Same for landscapes. If you are a bokeh fan, yes the f1.4 lens are better.  The older 23 f1.4 lens that you are considering is a very good and respected lens. The f1.4 vs f2 aperture per se is perhaps not so important. The 23 f2 is very small, light and practical and a great lens for travel and landscapes. So, go figure. I am afraid I just sent you further down the road to insanity !
    • First post here but long time fuji shorter. I use the XT2 with the 23mm f2 / 35mm 1.4 / 16-80mm f4 I'm considering the 23mm f1.4 r (Non-WR) About me: - I shoot black and white only. - I like macro details to wide open landscapes and everything in-between. - I shoot mostly for art, intrigue and creativity of the image. My question - is the 23mm f1.4 going to offer me any meaningful difference over the f2 for the above scenarios Thanks and sorry for bringing it up again...
    • I discovered this unmarked government installation today.  

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...