Jump to content

Recommended Posts

I recently reacquired the Fuji 56f1.2. It's a fantastic lens and I should never have sold it.

 

However, my new copy of the 56 occasionally makes a humming sound that persists after acquiring focus in AF-S mode. I don't recall my old 56 ever doing this on my X-T2 so now I'm slightly concerned.

 

For the rest there doesn't appear to be anything wrong with it.

 

At about one in a 20 shots, especially at minimum range (though I've also had it happen at infinity), the auto-focus motor keeps humming after acquiring focus. Sometimes it stops after a few seconds, but I've also had occasions where it wouldn't stop until I'd press the focus button again or switch off the camera. It happens in AF-S mode.

 

My question is: do other people with the 56 experience this occasional after-focus hum as well, or could it be that I got a bad copy? And my second question is; could it possibly damage or shorten the lifespan of the lens when the autofocus motor keeps running after acquiring focus? I would hate to have the lens work for two years and then break just after the warranty has expired. And my last question: would you keep it and try your luck, or would you return it to the shop and exchange it for another copy?

 

Edit: Problem solved, see my post below.

Edited by Mervyn
Link to post
Share on other sites

To answer my own questions: Never mind, because I just discovered that my 3 year old 23f1.4 does the exact same thing! Once every 20-30 shots or so I can hear a soft humming sound from the autofocus motor that persists after it has acquired focus in AF-S mode. So I'm relieved. Because it's a new lens I pay extra attention to these things. But because my old 23 does it too, hey, I guess it must be normal. :-)

 

My guess now is that it's not the lenses at all; rather I think it could be the camera (X-T2) that somehow is still giving a small current to the autofocus motor of the lens after having already acquired focus. But it happens only once every 20-30 shots or so, and most often it won't happen at all. I think it's not a physical problem but rather something firmware related. Could be a small bug, but likely nothing too serious. Actually it's a very soft hum, hardly noticeable, but it's there. Much softer then the usual autofocus noise. Did anyone else notice this?

Edited by Mervyn
Link to post
Share on other sites

  • 6 months later...

Hey Mervyn,

 

I think I have the exact same issue on 2 of my 3 lenses: the 16mm 1.4 and 56mm 1.2, but not the 55-200mm.

 

Approximately every 20 times I focus on something with back button AF, single point focus, and instant AF setting set to AF-S, there is a persistent humming sound of the autofocus motor until I either focus again or press the playback button. It is disconcerting for sure.

 

Did you end up living with it on your X-T2? Did it ever escalate into something more? Or did you send your camera back for Fujifilm to take a look?

Link to post
Share on other sites

  • 2 years later...

Ok, an old thread. But I have this as well on my x--e3. Especially with the xf 27mm, but also other lenses. Happens both in AFS and M with back button focus. The humming sound after focusing, and it does not stop before you press again. Happens about after 10-20 focus attempt.  Did you send it in for repair?

Edited by jjesp
spelling
Link to post
Share on other sites

  • 3 years later...

Just chiming in here, I also have this on a X-T5 and a 23mm XF 1.4 R (not the newer model), every 20-30 focus's the motor will just continue to make a noise until you either AEL or AF again (these are both brand new, so was checking to see who else had the issue, relieved its just not just me!)

Here is a video of the "issue", so is this normal? 

Note, this does not occur with the 16mm XF WR 2.8.

Edited by curthard89
added more details
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • I found the reddit topic i refere to :  https://www.reddit.com/r/davinciresolve/comments/1pc3f1e/cant_apply_new_fujifilm_gfx_55_lut/ "Update for y'all, It's just like what @ExpBalSat said, it's because of the backslashes in the names break them. I changed the file name and it works now. "   For me it was the solution. Realy annoying if it doesn’t work for you 😕  
    • Here is the solution to using the Eterna 55 file simulation LUTs in Davinci Resolve.   In general, do not use the FLog2C to film simulation LUTs as they are not supported by Davinci Resolve for two reasons: 1) Davinci Resolve does not support Fuji Gamut Color Space and 2) Davinci Resolve does not support FLog2C gamma.  Instead, use Flog2 which is supported by Davinci Resolve.  Here is an example.  Let's say that you want to use Classic Chrome simulation.  Do the following: Complete your color grade and use a CST to get to Rec 709. Add a node.  Use a CST to convert from Rec 709 to FLog2.  Output Color space is Rec 2020 and Outout Gamut is FLog2. Add a node.  Apply the FLog2 to Classic Chrome LUT Create a combination node from node in steps 2 and 3. Apply a Key to the combination node and adjust the Key Output Gain to get the amount of the combination node that you want applied. So that you do not have to do this over and over again, generate a LUT for the combination node.  Remember to turn off all other nodes before generating the LUT. Hope this helps others. Don  
    • Thanks for the insights. I think it's really hard to make a decision without having the two side by side! 
    • I don’t have the 23 f2 but I have read several times that it is considered a little soft at close distance, compared to the 23 f1.4 lenses. These will also focus at shorter distance from the subject, esp. the new one. So that might make a difference. The new 23 f1.4 LM WR  has better resolution, esp. in regard to the 40Mpix sensors, which you don’t have on the X-T2. What practical difference that makes for the value of the pictures one makes is disputable and subjective.  f1.4 will gather more light but with a smaller DOF, which may be desirable in some situations but not so in others, depends. If you like to shoot close ups, you will probably use higher f numbers to get a bigger DOF. Same for landscapes. If you are a bokeh fan, yes the f1.4 lens are better.  The older 23 f1.4 lens that you are considering is a very good and respected lens. The f1.4 vs f2 aperture per se is perhaps not so important. The 23 f2 is very small, light and practical and a great lens for travel and landscapes. So, go figure. I am afraid I just sent you further down the road to insanity !
    • First post here but long time fuji shorter. I use the XT2 with the 23mm f2 / 35mm 1.4 / 16-80mm f4 I'm considering the 23mm f1.4 r (Non-WR) About me: - I shoot black and white only. - I like macro details to wide open landscapes and everything in-between. - I shoot mostly for art, intrigue and creativity of the image. My question - is the 23mm f1.4 going to offer me any meaningful difference over the f2 for the above scenarios Thanks and sorry for bringing it up again...
×
×
  • Create New...