Jump to content

Recommended Posts

MG_3042-web.jpg

(pic from Google)

 

the Samyang 12mm looks about the same size of the XF14 if not smaller, correct? if so, I believe it would all definitely fit the 16L.

 

IMG_20130510_18135201_zpskvrcyovf.jpg

^

in this configuration, i had the X-E1 + 18-55 attached, XF35 and XF14 (this could be your 12mm). the extra 2"-long dividers I had just below each lens could be removed to accommodate a larger-in-diameter lens.

 

2015-07-13_11-02-22_zpsjc3g7png.jpg

^

you could then place your 50-230 in the upper compartment of the bag. a lens pouch would be nice for added protection, or.. depending on the season/climate where you're going, you could toss a light windbreaker or light sweater in there to help keep it from moving around.

 

BTW, if you happen to keep on (I removed mine) and wear the waist strap/belt, you could swing the bag to your front side to swap out lenses from the main camera compartment in the back sort of like this...

 

_RFG0051_zps9bbb8016.jpg

 

(Sent from another Galaxy)

 

 

Cool.  Thanks again for the the tips.  I really appreciate it!  It does look like a good option, specially since we might be all day out and about.  

 

Thank you very much once again!! 

Link to post
Share on other sites

Cool. Thanks again for the the tips. I really appreciate it! It does look like a good option, specially since we might be all day out and about.

 

Thank you very much once again!!

sure. np. you could always keep your 50-230 in the same space meant for the body + 18-55 while you're walking around with your camera at hand. and if you're going into a cafe or restaurant, just quickly toss the body w/lens into the top compartment.

 

(Sent from another Galaxy)

Link to post
Share on other sites

sure. np. you could always keep your 50-230 in the same space meant for the body + 18-55 while you're walking around with your camera at hand. and if you're going into a cafe or restaurant, just quickly toss the body w/lens into the top compartment.

 

(Sent from another Galaxy)

I was just thinking that exact thing. Thanks!

 

Sent from my SM-N910C using Tapatalk

Link to post
Share on other sites

  • 1 year later...

The  Lowepro Photo Hatchback is mighty impressive but at 22L is a tad too small for my traveling needs. I am shifting to mirrorless with my recent purchase of the XT2 and intend to travel a fair bit with it. I plan to carry that along with a 35mm f/2 lens and the Samyang 12mm lens. Overall I am looking for a good travel backpack which shall also give me an option of keeping my camera secure. I have spent ages looking around for a bag that fits my needs (I need a good amount of space for personal items, a laptop and a fairly small space for camera gear), but all the large camera bags seem to cater to people with loads of camera gear and not for people like me.

 

Currently I am in the position of using a Tenba BYOB camera insert into my regular travel backpack and although it keeps my camera secure and gives me room for personal items, I do find it inconvenient to access the cameras and would like a more streamlined option. I was wondering if anyone had any suggestions.

Link to post
Share on other sites

  • 3 months later...

The Lowepro Photo Hatchback is mighty impressive but at 22L is a tad too small for my traveling needs. I am shifting to mirrorless with my recent purchase of the XT2 and intend to travel a fair bit with it. I plan to carry that along with a 35mm f/2 lens and the Samyang 12mm lens. Overall I am looking for a good travel backpack which shall also give me an option of keeping my camera secure. I have spent ages looking around for a bag that fits my needs (I need a good amount of space for personal items, a laptop and a fairly small space for camera gear), but all the large camera bags seem to cater to people with loads of camera gear and not for people like me.

 

Currently I am in the position of using a Tenba BYOB camera insert into my regular travel backpack and although it keeps my camera secure and gives me room for personal items, I do find it inconvenient to access the cameras and would like a more streamlined option. I was wondering if anyone had any suggestions.

Check our the new Peak Design backpacks. I don't own one, but I've seen a prototype and they are very modular.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Thank you. I will research it.
    • Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...