Jump to content

fujifilm xt-30 ver2 firmware issues

YOUTA

By YOUTA
in Fuji X-T3 / Fuji X-T30

 Share

Recommended Posts

YOUTA Community Regular

YOUTA

Posted
Posted

i updated my fujifilm xt 30 two days ago and here is a few huge issues i encountered.

  • not charging when using a usb c pd charger, which worked until this update
  • not charging when using usb cable connected to computer
  • not able to connect to computer via usb, it's not detected in computer or camera after this update
  • battery life has basically halved after this update 

all these issues need to be fixed asap. and i updated this firmware using the phone app, so that's a difference this time. and if anyone else have any solution, please let me know so that i can try those too.. since right now camera is basically useless for me, until this is fixed.

Link to post
Share on other sites
YOUTA Community Regular

YOUTA

Posted
  • Author
Posted (edited)

also i noticed now that i am not the only fujfilm xt-30 user who's experiencing issues after version 2 firmware update. so anyone who have issues after this version 2 update please list your issues under this thread, so we can know all the issues found so far in a single thread and that will be helpful to fix the issues in the next update. or to share the fixes we find for each issues. thanks

Edited by YOUTA
Link to post
Share on other sites
YOUTA Community Regular

YOUTA

Posted
  • Author
Posted

update : the charging and file transfer issue is fixed.

i was searching for ways to downgrade the firmware after posting this, because i read some articles that it fixes etc.. but didn't found any ways to do that.. but i found that we can actually update the firmware again with the same version of the firmware file. so i downloaded the firmware again and this time i didn't use the fuji camera remote app, i used card as always and updated it again and the issues were fixed, i haven't tested the battery life, but i am hopeful that it's fixed too since other issues are fixed by doing this. so anyone who got issues after version 2 firmware update, please update again using card and see if that fix the issues. if not then add your issues under this thread. also never use fujifilm camera remote app to update firmware, it's the first time i used app to update and i got enough issues by doing it. have a great day everyone.

Link to post
Share on other sites
  • 2 months later...
Sergio H Newbie

Sergio H

Posted
Posted

I have tried to update the firmware version of my XT-30 from 1.51 to 2.0 without success. When I use Cam Remote, the App indicates that the camera already has the most recent software. If i use a memory card, the camera indicates that it is not possible to find the software in the card. What else should I do to update the firmware?

Sergio

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • PoorAlchemist
      LUT doesn't works on resolve

      By PoorAlchemist · Posted

      I found the reddit topic i refere to :  https://www.reddit.com/r/davinciresolve/comments/1pc3f1e/cant_apply_new_fujifilm_gfx_55_lut/ "Update for y'all, It's just like what @ExpBalSat said, it's because of the backslashes in the names break them. I changed the file name and it works now. "   For me it was the solution. Realy annoying if it doesn’t work for you 😕  
    • Don Barar
      LUT doesn't works on resolve

      By Don Barar · Posted

      Here is the solution to using the Eterna 55 file simulation LUTs in Davinci Resolve.   In general, do not use the FLog2C to film simulation LUTs as they are not supported by Davinci Resolve for two reasons: 1) Davinci Resolve does not support Fuji Gamut Color Space and 2) Davinci Resolve does not support FLog2C gamma.  Instead, use Flog2 which is supported by Davinci Resolve.  Here is an example.  Let's say that you want to use Classic Chrome simulation.  Do the following: Complete your color grade and use a CST to get to Rec 709. Add a node.  Use a CST to convert from Rec 709 to FLog2.  Output Color space is Rec 2020 and Outout Gamut is FLog2. Add a node.  Apply the FLog2 to Classic Chrome LUT Create a combination node from node in steps 2 and 3. Apply a Key to the combination node and adjust the Key Output Gain to get the amount of the combination node that you want applied. So that you do not have to do this over and over again, generate a LUT for the combination node.  Remember to turn off all other nodes before generating the LUT. Hope this helps others. Don  
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      Thanks for the insights. I think it's really hard to make a decision without having the two side by side! 
    • George_P
      Please save me from insanity 23mm f2 vs F1.4r

      By George_P · Posted

      I don’t have the 23 f2 but I have read several times that it is considered a little soft at close distance, compared to the 23 f1.4 lenses. These will also focus at shorter distance from the subject, esp. the new one. So that might make a difference. The new 23 f1.4 LM WR  has better resolution, esp. in regard to the 40Mpix sensors, which you don’t have on the X-T2. What practical difference that makes for the value of the pictures one makes is disputable and subjective.  f1.4 will gather more light but with a smaller DOF, which may be desirable in some situations but not so in others, depends. If you like to shoot close ups, you will probably use higher f numbers to get a bigger DOF. Same for landscapes. If you are a bokeh fan, yes the f1.4 lens are better.  The older 23 f1.4 lens that you are considering is a very good and respected lens. The f1.4 vs f2 aperture per se is perhaps not so important. The 23 f2 is very small, light and practical and a great lens for travel and landscapes. So, go figure. I am afraid I just sent you further down the road to insanity !
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      First post here but long time fuji shorter. I use the XT2 with the 23mm f2 / 35mm 1.4 / 16-80mm f4 I'm considering the 23mm f1.4 r (Non-WR) About me: - I shoot black and white only. - I like macro details to wide open landscapes and everything in-between. - I shoot mostly for art, intrigue and creativity of the image. My question - is the 23mm f1.4 going to offer me any meaningful difference over the f2 for the above scenarios Thanks and sorry for bringing it up again...
×
×
  • Create New...