Jump to content

Recommended Posts

Hi all,

I am looking at sellingmy X100T and grabbing the X-pro2 and 27mm (primarily for its compact size) - does anyone have any experience with this combo? 

If so, how is the AF speed? if you also have the new 35mm WR how do the two compare?

 

Any advice much appreciated  

Thanks :)

Edited by lhotse
Link to post
Share on other sites

The X-Pro2 is my first Fuji camera, and I was determined to start with the 27mm, because I was hooked on the Panasonic 20mm and its unique field of view when I was still using a Pen M4/3 camera. However, after watching hundreds of images from the 27mm, I recognised the one thing that I dislike about the Pana 20mm ... a bokeh with an unpleasing kind of blur. It looks shaky, artificial and plain ugly at times. I found that phenomenon in the XF27mm too many times to my liking and decided to go for the 35mm WR. The latter is a wonderful piece of glass and does render out-of-focus image areas more beautifully, but I do miss the 40mm (35mm equiv.) field of view. I was hoping that Fuji would take the 27mm more seriously, but that won't be happening any time soon I'm afraid. In my opinion it offers the most perfect angle of view (between the wide 23mm and the narrow 35mm), and I still may buy it after all, despite the nature of its bokeh. I wonder if the shaky bokeh (d)effect is typical for lens designs used for pancakes, or is it a coincidence that both the Pana 20mm and the XF-27mm share this signature?

 

The AF with the X-Pro2 seemed to be very accurate and fast. At least there wasn't a noticeable difference with the 35mm WR. I haven't tested all possible situations of course.

Link to post
Share on other sites

Hi Lhotse,

 

I'm using the X-Pro 2 and the 27mm.

In my opinion the 27mm is a brilliant lens and its certainly compact/lightweight. That said I'd keep your X100T for now and wait for the X100T successor. Because if compact is what you want then the X100T successor will be smaller/lighter and just as good as the Xpro2 with the 27 mm on the front.

 

Brgds

Nick

Link to post
Share on other sites

  • 5 months later...
  • 1 year later...

Have you tried a firmware update? It should not be needed but since it will reset most everything when you run it it is worth a try (and harmless)

 

I believe there is a lens update as well that ties in with the XP2 update that improved focus.

 

It's a great little lens, the field is not 100% flat but that has not been a problem however it is sensitive to cross light and it doesn't have a hood which is a faux-pas at the price.I made a cheap felt tube that fits the barrel - it works when I remember it.

Link to post
Share on other sites

  • 2 weeks later...

I have an x-pro2 with 27mm (and 18-55mm and 56mm 1.2). The autofocus is not very fast and maybe a bit too noisy (this seems to me the real problem) but the lens is wonderful for its great performance and its small size. It's the ideal lens for street photography .... I find it a very high quality lens that's just a bit weak in the backlight, but it's a "must have" with the x-pro2. The bokeh? I bought the 56mm 1.2 for the excellent bokeh, from 27mm I expect "good performance and low profile" ... Exactly what it offers.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Thank you. I will research it.
    • Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...