Jump to content

Difficulty in viewing scenes with my XT-3 through both the LCD and EVF when the sun is very bright - the scene appears dark

stevem44

By stevem44
in Fuji X-T3 / Fuji X-T30

 Share

Recommended Posts

stevem44 Contributor

stevem44

Posted
Posted

Hi,

I have difficulty in viewing scenes with my XT-3 through both the LCD and EVF when the sun is very bright sun - the scene appears dark.

The relevant parameters that I am using are as follows:

EVF brightness: -1, LCD brightness: +3, Natural live view: off (I want a natural view of how the scene looks).

In searching for information regarding this matter, I see that some people recommended not using the auto feature, and used negative values for EVF brightness and positive values for LCD brightness; however, this does not seem to help much in very sunny situations. When the scene is not particularly sunny, I see through both the EVF and LCD fine. Any suggestions would be appreciated.

Thanks

                                 

                                                               

 

Link to post
Share on other sites
YOUTA Community Regular

YOUTA

Posted
Posted
11 hours ago, stevem44 said:

Thanks a lot! I will check this.

Regards,

Steve

set evf brightness to +5 to increase the brightness of evf , thereby you can see more clearly in sunlight through evf. also set lcd brightness to +5 to get maximum brightness from lcd in sunlight . negative values means lower brightness thus darker image , so always go up the positive value's up to the max (+5) ,if you still have difficulty in seeing in sunlight . then jerryy's method will work . i hope this helps . have a nice day ahead !

Link to post
Share on other sites
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Posts

    • Don Barar
      LUT doesn't works on resolve

      By Don Barar · Posted

      Here is the solution to using the Eterna 55 file simulation LUTs in Davinci Resolve.   In general, do not use the FLog2C to film simulation LUTs as they are not supported by Davinci Resolve for two reasons: 1) Davinci Resolve does not support Fuji Gamut Color Space and 2) Davinci Resolve does not support FLog2C gamma.  Instead, use Flog2 which is supported by Davinci Resolve.  Here is an example.  Let's say that you want to use Classic Chrome simulation.  Do the following: Complete your color grade and use a CST to get to Rec 709. Add a node.  Use a CST to convert from Rec 709 to FLog2.  Output Color space is Rec 2020 and Outout Gamut is FLog2. Add a node.  Apply the FLog2 to Classic Chrome LUT Create a combination node from node in steps 2 and 3. Apply a Key to the combination node and adjust the Key Output Gain to get the amount of the combination node that you want applied. So that you do not have to do this over and over again, generate a LUT for the combination node.  Remember to turn off all other nodes before generating the LUT. Hope this helps others. Don  
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      Thanks for the insights. I think it's really hard to make a decision without having the two side by side! 
    • George_P
      Please save me from insanity 23mm f2 vs F1.4r

      By George_P · Posted

      I don’t have the 23 f2 but I have read several times that it is considered a little soft at close distance, compared to the 23 f1.4 lenses. These will also focus at shorter distance from the subject, esp. the new one. So that might make a difference. The new 23 f1.4 LM WR  has better resolution, esp. in regard to the 40Mpix sensors, which you don’t have on the X-T2. What practical difference that makes for the value of the pictures one makes is disputable and subjective.  f1.4 will gather more light but with a smaller DOF, which may be desirable in some situations but not so in others, depends. If you like to shoot close ups, you will probably use higher f numbers to get a bigger DOF. Same for landscapes. If you are a bokeh fan, yes the f1.4 lens are better.  The older 23 f1.4 lens that you are considering is a very good and respected lens. The f1.4 vs f2 aperture per se is perhaps not so important. The 23 f2 is very small, light and practical and a great lens for travel and landscapes. So, go figure. I am afraid I just sent you further down the road to insanity !
    • crazyfields
      Please save me from insanity 23mm f2 vs F1.4r

      By crazyfields · Posted

      First post here but long time fuji shorter. I use the XT2 with the 23mm f2 / 35mm 1.4 / 16-80mm f4 I'm considering the 23mm f1.4 r (Non-WR) About me: - I shoot black and white only. - I like macro details to wide open landscapes and everything in-between. - I shoot mostly for art, intrigue and creativity of the image. My question - is the 23mm f1.4 going to offer me any meaningful difference over the f2 for the above scenarios Thanks and sorry for bringing it up again...
    • DavidJohn
      Unmarked government installation

      By DavidJohn · Posted

      I discovered this unmarked government installation today.  

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...