Jump to content

Hello! 23yo beginner photographer from Sweden!


Recommended Posts

Hi. This is my introduction post. I'm a 23yo beginner photographer from Sweden who has just bought his first ever professional camera a little over a week ago (Fujifilm X-T3) and has no clue what he's doing.

My first question to all of you is HOW. I am honestly terrified I'm going to break it and whenever I watch a video I end up feeling even more confused by all these settings and buttons. I feel like I'm never going to learn how to use this camera - and if I do, it will probably take me another 9 months until I take my first REAL photo with it.

I'm excited to join this forum and learn more about the photography world, as well as the Fujifilm universe. :) 

Link to post
Share on other sites

13 hours ago, Olaf W. said:

Welcome to our forum. There is an internal battery (or capacitor) inside the cam to hold the power for some if the camera is switched off and the attached battery is empty or removed. It seems that this internal battery is malfunctioning. The cam probably needs service.

 

Hi Olaf! Thank you very much. Are you sure? I just bought this camera brand new less than 2 weeks ago. 

Edited by Remarquable
Link to post
Share on other sites

8 minutes ago, Olaf W. said:

It‘s the best explanation in my opinion. Of course there can be other reasons. But these would also lead to the conclusion that the camera is defective.

Having asked the same question in another forum, I've been told it could be due to me not having charged the internal battery. Apparently I'm supposed to leave the battery inside the camera for a whole day before I use it - just to allow the internal battery to charge.  

Link to post
Share on other sites

Actually, you need to pretty much leave the big battery in the camera as much as possible. If you leave it out, the internal battery will lose its charge after a while and all of your settings will go back to the fresh from the factory setup. Leaving the big battery out for a while is an alternative way to do a full reset in case things go very wrong. The internal small battery is there to keep the settings while you do battery swaps, etc.

Link to post
Share on other sites

20 hours ago, jerryy said:

Actually, you need to pretty much leave the big battery in the camera as much as possible. If you leave it out, the internal battery will lose its charge after a while and all of your settings will go back to the fresh from the factory setup. Leaving the big battery out for a while is an alternative way to do a full reset in case things go very wrong. The internal small battery is there to keep the settings while you do battery swaps, etc.

When you say big battery, do you mean the external battery that came with the camera and that needs to be charged every once in a while? Or is there a third battery I - a newbie - don't know about? 

Link to post
Share on other sites

2 hours ago, Remarquable said:

When you say big battery, do you mean the external battery that came with the camera and that needs to be charged every once in a while? Or is there a third battery I - a newbie - don't know about? 

The external one that came with the camera. Leave that one in as much as possible. If you can, get an extra battery or two and keep them all charged. Then when you are out shooting and the battery you are using gets low, swap it with another and continue shooting. The internal battery will keep your settings from disappearing while you swap the batteries, but it is not made for holding those settings long term, for that you need to keep the big battery in the camera.

The X-T30 allows you to charge the external batteries while they are in the camera, but it usually faster to use an external charger. You might be able to find a X-T10 (new or used) charger for not much money and use it — the batteries are the same and will work in the same charger. As far as extra batteries goes, lot of folks have their favorites regarding price and capacity, you should be able to find ones from Wasabi Power for reasonable prices — they also sell chargers.

Link to post
Share on other sites

On 2/14/2021 at 1:14 AM, jerryy said:

The external one that came with the camera. Leave that one in as much as possible. If you can, get an extra battery or two and keep them all charged. Then when you are out shooting and the battery you are using gets low, swap it with another and continue shooting. The internal battery will keep your settings from disappearing while you swap the batteries, but it is not made for holding those settings long term, for that you need to keep the big battery in the camera.

The X-T30 allows you to charge the external batteries while they are in the camera, but it usually faster to use an external charger. You might be able to find a X-T10 (new or used) charger for not much money and use it — the batteries are the same and will work in the same charger. As far as extra batteries goes, lot of folks have their favorites regarding price and capacity, you should be able to find ones from Wasabi Power for reasonable prices — they also sell chargers.

Thank you so, so much! I'm sure my questions seem really silly to people who are experienced photographers so I really appreciate you helping me out. Is there ever a time when I should be leaving my external battery out of the camera (except for when it's charging)? 

 

I don't own an X-T30, just an X-T3 :)

Link to post
Share on other sites

Your questions are not silly at all, very few of us are born already knowing how everything works. 😀

If you run into some setting combination that you cannot seem to undo using the menus and the ‘reset everything’ menu choice does not help, pull the battery and leave it out, set the camera on the shelf for a few days, all of the setting will go back to their initial, fresh from the factory settings, so that can help you keep your sanity during those times when you are certain your camera has a mind of its own.

But do pull it from time to time and examine the contacts on the battery and in the body to make sure they do not get discolored, that would be a sign of a possible bad battery.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • It is really easy to find out if the wifi is on. Your computer or tablet or cell phone will have a network settings dealing with wifi, bluetooth, ethernet or “other”. Open that up and go into the section for wifi, and take note of which networks are listed. Turn on the camera and keep watching the list of networks. If your camera’s wifi is turned on, a new network should suddenly show up in your computer/tablet/phone’s network listings. Now go into the camera’s menus and start a wireless connection (the x-app or camera remote app can help you with this). You should see a network show up now. It is not hidden because it has to be visible so that your computer/tablet/phone can join the camera’s network to transfer images. Turn the camera off and that network should disappear. Turn the camera back on and see what happens.
    • Sweet Creek Falls, Oregon. X-H1, Viltrox 13mm F1.4, Acros.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • I think my Fuji 150-600 F8 is a brilliant wildlife lens in terms of sharpness, portability and value but the small aperture does cause issues at the start and end of the day - even pushing the ISO as far as I dare, I can see shutter speed down to 1/25s - stabilisation isn't an issue but asking a deer to stand still for that is too much! In the same situation, an F4 would give 1/100s so the difference to the success rate would be phenomenal... and that's without the other improvements like shallower depth of field. I also find that the Fuji's subject detect AF gets pretty iffy in low light - I keep updating to the latest firmware but it doesn't seem to get any better. I was originally looking at the Nikon 500mm F4 E but good examples secondhand are still reasonably expensive but like-for-like Sigma lenses are around half the price. Reviews I have read suggest that they are as good optically, AF performance and IS-wise but you gain a few hundred grams of weight (but less than the older Nikon model). For a couple of grand, I can live with that. Does anyone have any experience mounting one on an XH2S? What about with the 1.4 teleconverter? It feels like that is pushing it anyway - hefty lens + TC + Fringer all sounds a bit...wobbly? It is on the Fringer approved list but I am wary about AF speed in particular. I had also considered looking for a used Nikon 400mm F2.8, which would be even faster (and heavier) and could couple with a TC to give 560mm F4 but again, it is that lens+TC+Fringer combination that worries me as being just too many links in the chain. Of course, what I really want is a native Fuji prime but that doesn't seem to be on the horizon - and if you look at what Nikon and Sony are doing, if Fuji do ever bring out a 500mm prime, it will probably be a small, light and cheapish F5.6, which is only 2/3 stop better than my zoom at the same focal length. Any thoughts anyone?
    • The Amazon link is an annoying feature of this forum - its automatic and is applied to every post for advertising purposes. My question was - how do you know the camera wi-fi is on and requires turning off? I would have thought this would just use up the battery for no purpose if you aren't specifically using a function that requires wi-fi.
    • I've made a point to push Angelbird memory products as they are the best performance cards you can get, The sustained write speed is important.
×
×
  • Create New...