Jump to content

Recommended Posts

For those wishing to pick up a decent-priced X-T1 this summer, when do you think the prices will drop and by how much?

 

Itching to get one in June/July when I'm in Canada.  Do you think prices will drop before June's announcement or not until after it is announced?  Or worse, will prices not drop until they start rolling out (possibly in the autumn)?

Link to post
Share on other sites

It'll probably start a couple of months before Christmas 2016. Probably looking at USD799.00 as a starting point.

 

There will probably be a round of promo for the xPro2 during June/July till August. Don't know if x-T1 will benefit.

 

These are from my personal market observations.

Link to post
Share on other sites

I didn't want to wait for summer or later so I picked up an XT-1 from BH for $1149 used with the 18-55 in 10 condition.  I have it now rather than wait.  But just to balance the equation, I picked up a new XP1 body at the same time for $500.

Link to post
Share on other sites

Here the camera costs still the same €1.199 BUT there is a temporary cash-back of €200 ( which is only going to increase). However, as we’ve seen with other examples, the BeNeLux importers have been very slow at doing any price drop compared to their British counterparts

 

http://www.kamera-express.nl/product/12193714/fujifilm-x-t1-body-flitser/

 

I am being told that following the X pro 2 introduction the sales of the X-T1 were hit seriously ( and that the X-E2S will probably be one of the most collectable cameras in future years since they aren’t selling  them in any large numbers at all!).

 

Of course it looks like everyone is holding his breath.

 

Of course the secondhand market reflects that but amazingly a lot of sellers aren’t aware that they are offering a secondhand camera at the just under the price you pay for a NEW one!

 

In fact most hover around the €850 to €950 mark which is absolutely unrealistic if, considering the cash-back you pay €999 for this camera new in the shop.

 

Fuji strategy to phase the introduction of similarly placed models into a given market segment looks like is stimulating sales of the X Pro 2 milking the novelty factor to the outmost before introducing the other Pro model X-T2.

 

The release of rumors, pictures, pre-production models only works as a stopping device for the sale of the actual models.

 

I am not sure how they deal with this with the shops.

 

Suppose that a shop like the one I’ ve mentioned above with many shops around several countries has bought a certain amount of camera bodies to keep in stock, the moment Fuji introduces a newer model and rumor spread they no longer sell those at the intended price, so they sell them, maybe, later on, at a price maybe lower than they paid.

 

Do they get compensation from Fuji?

 

I suppose they would.

 

As for the X Pro 1 they still have the kit for €899 with 18mm and 27mm, body at €549 with an extra battery, still very convenient but there are very few takers.

Link to post
Share on other sites

Thank you for the input!  

 

Pricing for a new X-T1 at one shop here in the UK is £805 (£705) with cash-back with a quailty (9/10) X-T1 used (same shop) going for £593.  The price difference - at least for me - isn't enough to make the used one attractive as I'd rather get brand new and a warranty for the £112.

 

You can find a better deal on a used X-T1 on eBay with prices around £500 for the body only.

 

Like you, CSG, I may just pick up the X-T1 when I need to (while in Canada) and just hope for a deal or bite the bullet (or get something else in the meantime...the X70 is quite intriguing).

Link to post
Share on other sites

Before the release of the X-T2, I highly doubt we will see much official price drop, there might be some sales here and there, but nothing really major to boot. 

 

So chances are it will be the first 3-6 months after the release of the X-T2 and slowly decrease the older it gets. But do remember that the camera wasn't THAT expensive at release when compared to the competition, it was slightly above the D7200 and similar price as the 70D with also a 18-135 zoom kit and could be following the same trend for the prices.

Link to post
Share on other sites

  • 3 weeks later...

For those wishing to pick up a decent-priced X-T1 this summer, when do you think the prices will drop and by how much?

 

Itching to get one in June/July when I'm in Canada.  Do you think prices will drop before June's announcement or not until after it is announced?  Or worse, will prices not drop until they start rolling out (possibly in the autumn)?

http://www.fujirumors.com/new-x-deals-starting-may-22-save-up-to-400-fujifilm-x-t10-double-kit-deal-live-now/

Link to post
Share on other sites

well you can’t miss the camera that you don’t have.

 

As you know I have the X-T1 and the X-E2.

 

I am happy with both and would miss having the EVF of the X-T1. However I am quite happy to use the X-E2 very often because is smaller and lighter. I am taking that camera on holiday, for example.

 

On a completely different note.

 

I bought to do a test a Minolta X-300 (film analog) and by peeking through the lens my first thought was “ Wow” this is sharp!

Link to post
Share on other sites

The deal is valid. But I got a letter from Fuji lawyers... nice way to wake up in the morning

 

the story is simple: sell a kidney, my Mazda2, and more to pay a lawyer and fight against Fujifilm, or take off the post. I went for the latter

 

Now you know how much Fuji loves me ;)

Link to post
Share on other sites

  • 3 weeks later...

I ended up buying a used, but in excellent condition, graphite X-T1.  While waiting longer would likely result in a better deal, I really wanted it for my trip to Canada this summer.

 

Now to get a couple of lenses.  Unfortunately, Fuji UK isn't likely to have the same kind of deal on lenses-only like in the US and Canada, so I'll order the lenses I want (35mm F2 and the 16mm) and have them delivered to my cousin's place (which is where I'm going first).

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • Bob is a well-known and much appreciated street performer, musician, comedian, and sometime circus performer. GFX100RF.  3200 ISO   1/60 sec.  f4.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • If the spots are in the same place every time then its likely a dirty sensor - you can buy a sensor cleaning kit and do it yourself or take it in to get cleaned professionally.
    • Hi everyone, I am experiencing a persistent and frustrating issue with my Fujifilm X-T50 and I’m looking for advice to understand if this is a known firmware bug or a mechanical defect requiring service. When I turn on the camera and take a picture immediately in Manual Mode, the first frame is significantly overexposed. Any subsequent shot taken immediately after is perfectly exposed, even though the settings (ISO, Aperture, Shutter Speed) have not changed.  The issue is intermittent. It stopped happening for a period but has recently started occurring again. Also the problem does not persist when i am using electronic shutter but on this side i'm still conducting some tests trying to switch between ES and MS. I've checked many times all the settings like PREVIEW EXP./WB IN MANUAL MODE / NATURAL VIEW, i'm sure those setting aren't the causing the issue.  It happens with both: Fujinon XF 18-55mm (Digitally controlled aperture). Meike 35mm (Fully manual/analog aperture with no electronic contacts). Since it happens with the manual Meike lens, I believe we can rule out lens communication issues. Has anyone else experienced this first shot overexposure on the X-T50 or similar X-Processor 5 bodies (X-T5/X-H2)? Given that it happens with a manual lens, I suspect this might be a mechanical shutter issue or a firmware initialization bug where the sensor gain isn't resetting fast enough at boot. The two pictures i have attached show the problem at the same settings, the image is simply overexposed no other artifacts or strange colors. Should I send it in for warranty repair immediately, or is there a known firmware workaround? Thanks for your help!

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • Hi everyone, I’m hoping you can help me with an issue I’m having with my images. Every photo I take with my Fujifilm X-T2 has visible spots on it (as shown in the attached photo). Because of this, I have to spot-heal all my images in Lightroom just to remove the spots, which is very time-consuming. I’d really appreciate any advice or suggestions on what might be causing this and how I can fix it permanently. Thank you so much for your help!  

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • Like jerryy said lithium batteries are shipped partially charged. Do you have ibis turned on, and is it set to continuous or shooting only?  If continuous that could be the noise you hear.   I’d also contact Amazon on the shutter count and missing wall plug. 
×
×
  • Create New...