Jump to content

Sony A7000 (+ X-PRO2?) with better dyamic range than the Full Frame A7 series thanks to native “on sensor HDR”! src-SAR


Recommended Posts

This is basically what Magic Lantern does to the 5D Mark III. They call it Dual ISO I believe - they have alternating lines of a higher ISO for proper exposure and a lower ISO for cleaner images. It seems to work well, albeit at a lower resolution than the sensor natively outputs.

 

I think it's a cool idea, but it's not a priority for me. The dynamic range on the newer Fuji sensors is already amazing.

Link to post
Share on other sites

Also last time I tried out the magic lantern you needed a separate piece of software to actually deal with the images and video. I can imagine for a camera to do this it would need to be quite powerful.

Link to post
Share on other sites

This concept is not possible with X-Trans. You can't just skip 2 lines with X-Trans, you'd have to skip 6 lines. That's a pretty large exposure gap, and it would also need a different sensor design.

I would prefer bayern high HDR sensor instead of X-trans. In your x-m1 vs x-a1 comparison x-trans showed no significant advantage over Bayer. And this new technology seems to show serious DR increase.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Posts

    • The Tentacle Sync Timecode tool is the one I tried. I couldn't get it to work. But that is probably my fault, not the software. I seemed to get a file, but I couldn't turn it into anything meaningful. 
    • I am glad to read you are able to get this up and running. Pretty much as long as you connect connect the camera and turn it on, wait a few moments for the computer to register the connection and then you can then use Image Capture (which actually is a very decent program with a lot of options for transferring images from cameras to the computer) or Lightroom to move the images to your library. There are some drawbacks; connecting to the computer while it is in sleep mode will waste your time, the connection will not get recognized— you will have to unplug the camera, wake the computer and start over. Trying to connect while the screen saver is running may work, it may not, often not. If the computer goes into screen saver mode while the camera is connected and sitting idle, it usually stays connected when coming back out of screen saver, but if the computer mputer goes into sleep mode, the connection gets dropped and you have to unplug it and start over. I suggested having the camera turned off while connecting, this is to lower the possibility of static electricity discharges frying either the camera or the computer or both. A lot of times you can connect while the camera is turned on, but not always, sometimes you have to unplug, turn it off, reconnect and turn it back on. A lot of this comes from Apple’s approaches towards keeping USB devices from hijacking your computer, some is just hubris and some is the vagaries of chance. p.s. Your laptop should be able to connect to the camera.
    • Hi Chas, I am just fallen into the rabbit hole of investigating how to upgrade my X-T4's video sound... Loving the idea of time code sync, I am now quite concerned that the X-T4 doesn't support it, although I have already seen different statements on the net, like here:  https://youtu.be/xja27RmvbhE?si=hIch3Tu_MH_pWSBH&t=571 I have to admit, this guy's "explanation" gets quite confusing in his further discourse ...:) BUT, as you wrote that you use Tentacle Sync for Windows!, did you also try with their windows-only software "Time Code Tool" which you find here?: https://tentaclesync.com/timecode-tool   Would love to here if you found a workaround with the XT4 Best, Simon
    • It occurred sometime when I focus. It is not silent 
    • This is the video for the focusing sound. Anyone can help?🙏🏻🙏🏻🙏🏻thanks a lot IMG_3226.mov
×
×
  • Create New...