red/pink tone in viewfinder and image on x-pro 2

[skot22]

I was shooting my X-pro 2 camera with a 35mm F1.4 today, everything was working great. Then at the very end of the shoot, my viewfinder and image starting to have a monochromatic red/pink tone over everything, no other colors were visible, only red/pink. I continued with the shoot and figured I would adjust the RAW later. 

Got back, I looked at the RAW and the image is fine. However the camera is still doing the same problem. Here is what I have done to try and fix the problem.

 

1. Reset the camera, negative on fixing the problem

2. Switched WB to different setting to see if that did anything, negative on fixing the problem

3. Upgraded the Firmware to 3.0, negative on fixing the problem.

 

Please advise if anyone has experienced this before or know how to fix it.

 

Thank you

 

[poster]

.

Edited May 14, 2017 by Picturer

[zenmartini]

I just had my EVF replaced (under warranty) due to a line of red pixels showing up under some lighting conditions. Images were fine. Send it in for repair, poop does happen.

[HilaryMS]

Did you get an answer? My camera is doing the exact same it’s an X-T2

[Olaf W.]

Welcome to our forum. Please notice that the thread is more than six years old and refers to another camera model. You should consider asking a repair service since the symptoms point to a hardware problem.