Jump to content

Display ISO will be chosen when auto iso is set

SimonW
 Share

Recommended Posts

SimonW Contributor

SimonW

Posted
Posted

The XT5 and X100vi manuals both say that if the camera is set to auto ISO the chosen ISO will be displayed while half-pressing the shutter. I've seen some posts which confirm this, but on both my cameras the display shows only the set maximum even when the preview shows the shot will be over exposed even at the lowest possible ISO. Is possible some setting for something else affects this behavior?

Link to post
Share on other sites
  • 4 weeks later...
pw-pix Enthusiast

pw-pix

Posted
Posted (edited)

Go into the auto-iso setting in the menu and check the range you have assigned to the range you've chosen.

For exanple, I have Auto 3 set to use 200 to 12800 ISO and a minimum shutter speed of 1/100 sec.

Perhaps somehow you set the same lower and upper iso for the range you're using.

The auto iso works correctly on my X-E3 and my X-T5.

Edited by pw-pix
spelling
Link to post
Share on other sites
SimonW Contributor

SimonW

Posted
  • Author
Posted

pw-piz, Thanks for responding, but perhaps you mis-understood. My auto iso is set with upper and lower limits and it works perfectly. EXCEPT that while composing the shot and adjusting shutter speed and aperture it does not tell me the iso it will actually use - it displays the maximum it might use (which is my chosen maximum).  Only after I take the shot can I see the actual iso it used. I would have liked to know in advance, but I guess if I've set my max and min limits as I wish then it really doesn't matter.

It's the same on both my Fuji cameras and I suspect it's the description in the manuals that's incorrect.

Link to post
Share on other sites
SimonW Contributor

SimonW

Posted
  • Author
Posted

This video posted today mentioned this. HEREhttps://www.youtube.com/watch?v=1x_VNHE0TqE

It didn't quite address my problem, but it demonstrated how a half-press on the shutter button should reveal the actual iso measured rather than the set maximum. For me this does not happen. However, it did make me do some testing - and quickly found an answer:- The half press does not work, but the AELock button does indicate the iso value it locks to. Obvious really!

I've still not figured out why neither of my cameras do it with a half press on the shutter, maybe I've changed a setting somewhere on both of them that's caused it. If I ever find out what I'll post it here.

Link to post
Share on other sites
abmet Contributor

abmet

Posted
Posted

Both my X-T5 and X100V display the calculated iso when half press the shutter. Did you happen to change the  shutter AE to off in the button/dial settings?  I think if that is off the iso continues to show max iso when shutter half pressed. 

Link to post
Share on other sites
SimonW Contributor

SimonW

Posted
  • Author
Posted

WOW, Yes, you are of course correct. I've turned them on now for both s and m and cont, and now it works exactly as it should. Like most things, simple when you know how. I didn't know that setting existed, and can't think why anyone would want it turned off, nor remember ever doing so. Anyway, thank you so much abmet for helping.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Giampaolo Masserano
      Looking for Full Frame lenses to adapt to GFX

      By Giampaolo Masserano · Posted

      I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...