Jump to content

Change button assignments quickly

Pook

By Pook
in Fuji X-T5 / Fuji X-T50

 Share

Recommended Posts

Pook Newbie

Pook

Posted
Posted (edited)

Hi folks, how do I set up a custom mode/settings re buttons etc for my XT5 so that I can quickly change button assignments when I use a lens that doesn't have an aperture ring ?

Many thanks in advance 

Edited by Olaf W.
Title
Link to post
Share on other sites
  • Olaf W. changed the title to Change button assignments quickly
Pook Newbie

Pook

Posted
  • Author
Posted
17 minutes ago, Greybeard said:

What changes do you have in mind?

Hi Greybeard, currently my front and rear dials are set up for Shutter Speed and ISO and I use the aperture ring on the lens. But want to quickly change one of them (preferably front dial) to aperture when I use my wide-angle which doesn't have an aperture ring. Many Thanks.

Link to post
Share on other sites
abmet Contributor

abmet

Posted
Posted
On 7/5/2024 at 1:42 AM, Greybeard said:

Does it not automatically switch to aperture on the front dial with a lens without aperture ring?

https://fujifilm-dsc.com/en/manual/x-t5/about_this_camera/parts/#dial_drive

That’s what I thought as well. All my Fujifilm lenses have aperture rings, but couple Nikon lenses I use don’t and when I attach them the front dial switches to aperture.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • CarltonC
      TURN OFF CAMERA AND TURN ON AGAIN (!!!!)

      By CarltonC · Posted

      I had the same problem with the XF27mm f2.8. Found the below on a Reddit thread. "There is apparently a design flaw with this lens that causes it to get stuck sometimes when the camera is turned off at the closest focal distance (i.e. when the lens is fully extended.) The fix is to just push it back in manually (gently, of course.)" It fixed the problem straight away.  
    • dannycooke
      NEW access Issue With CF Express Type B card on XH2s

      By dannycooke · Posted

      I just want to say thanks very much!  That worked a treat - did as said used ‘clean all’ command and then waiting a while for it to do its thing, once I put the card back into the camera and initialised then removed it and put it back onto the PC it worked and popped up as usual.  Somehow overtime all 3 of my cards must have become corrupted.  But doing this worked, again Many thanks  Here are the steps I took so that if anyone else runs into this issue they can fix it: 1.  Put express card into the reader and plug into pc (you should hear a sound, but the card will not mount).   2.  Run ‘Command Prompt’ as an administrator,  you can find it in Start Menu and right click then run as administrator.  3. type in ‘diskpart’ This will load the software, be careful here as you could accidentally format the wrong drive. 4.  when DISKPART> is displayed type ‘list disk’.   wait a while and a list of all disks on the system will appear, look for the disk that is the size, in my case it was 476GB.  double check this is the right disk as you will format and erase all content on this disk to make it work.  5.  type ‘select disk 3’  in my case disk number 3 was the right one. 6.  type ‘clean all’   it took mine about 15 mins to work, it looks like it is doing nothing but it isn’t, it’s doing a full format.  You will get a prompt ‘DiskPart succeeded in cleaning the disk’ 7.  Remove the disk and place back into fuji camera, then format/initialise as normal.  8.  eject disk and place back into PC and it should mount as usual.   Hopefully that works!
    • dannycooke
      NEW access Issue With CF Express Type B card on XH2s

      By dannycooke · Posted

      Thanks i’ll give this a try 
    • Sandro_gsp
      NEW access Issue With CF Express Type B card on XH2s

      By Sandro_gsp · Posted

      I haven't had any problem with my XH2s and CFexpress card, but I struggled for almost 1 year with a 256GB SD card . To cut it short : I finally solved the problem formatting the SD card using windows DiskPart command. I think the key was removing everyting from the SD card using the "clean" command. Diskpart is rather technical, I hope you can understand how to use it. Search google for :   "diskpart erase partitions" Hope this helps.     
    • dannycooke
      NEW access Issue With CF Express Type B card on XH2s

      By dannycooke · Posted

      Hi,  i’ve had a look around the internet and can’t seem to find anyone with this issue.  Long story short is I used to be able to access my CF Express type B cards that are formatted by my XH2s on my pc and my mac.  They would pop up as an external drive through an external Sabrient reader.  Now they don’t?!  Has something changed in the firmware? something broken. A few observations: It now happens with all of my Sabrient cards. I bought a new Lexar reader and it does it with that too. If i format the cards on my RED camera and then mount on the computer they work fine as expected.  Once I put back in camera and format the card then place back to PC it doesn’t work. The only way i’ve been able to access the card is while it is plugged into the camera but this seems a lot slower to transfer data. Has anyone else noticed this? would appreciate any solutions. 
×
×
  • Create New...