Jump to content

XT5 setup F+Raw and Recipes


Chris.Massa

Recommended Posts

Hi Chris. The settings, such as a recipe, will affect the JPG preview/thumbnail that is saved with the raw image. Also, if you import your raw images into Lightroom you can "develop" the raw with the camera settings which will give you something similar to what it looked like in the camera with the recipe. It won't be exactly the same as Lightroom doesn't have the exact same film simulations.

Nick

Link to post
Share on other sites

The IQ (recipe) settings do not affect RAW files except for the Dynamic Range (DR) setting, which may force a higher ISO (DR200 requires base ISO x 2, DR400 requires base ISO x 4). Since a basic exposure parameter is affected, this does propagate to the RAW file. Please note that as mentioned above, Lightroom's Camera Profiles for the X-T5 do have film sims but (a) they're not necessary exactly the same as the built-in ones, and (b) they do not account for the other IQ settings such as tone and clarity. Those you will have to apply to the RAW file yourself in Lightroom. Capture One seems to have the closest approximations of the Fuji film sims, but again, you have to apply the other settings using the software sliders. If you're interested in keeping everything 100% Fuji, try the Fuji X RAW Studio software, which lets you play around with all of the IQ settings on your computer (but you do have to have your camera plugged in and USB set to BACKUP mode). This is the software a lot of people use to design new recipes.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • It is really easy to find out if the wifi is on. Your computer or tablet or cell phone will have a network settings dealing with wifi, bluetooth, ethernet or “other”. Open that up and go into the section for wifi, and take note of which networks are listed. Turn on the camera and keep watching the list of networks. If your camera’s wifi is turned on, a new network should suddenly show up in your computer/tablet/phone’s network listings. Now go into the camera’s menus and start a wireless connection (the x-app or camera remote app can help you with this). You should see a network show up now. It is not hidden because it has to be visible so that your computer/tablet/phone can join the camera’s network to transfer images. Turn the camera off and that network should disappear. Turn the camera back on and see what happens.
    • Sweet Creek Falls, Oregon. X-H1, Viltrox 13mm F1.4, Acros.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • I think my Fuji 150-600 F8 is a brilliant wildlife lens in terms of sharpness, portability and value but the small aperture does cause issues at the start and end of the day - even pushing the ISO as far as I dare, I can see shutter speed down to 1/25s - stabilisation isn't an issue but asking a deer to stand still for that is too much! In the same situation, an F4 would give 1/100s so the difference to the success rate would be phenomenal... and that's without the other improvements like shallower depth of field. I also find that the Fuji's subject detect AF gets pretty iffy in low light - I keep updating to the latest firmware but it doesn't seem to get any better. I was originally looking at the Nikon 500mm F4 E but good examples secondhand are still reasonably expensive but like-for-like Sigma lenses are around half the price. Reviews I have read suggest that they are as good optically, AF performance and IS-wise but you gain a few hundred grams of weight (but less than the older Nikon model). For a couple of grand, I can live with that. Does anyone have any experience mounting one on an XH2S? What about with the 1.4 teleconverter? It feels like that is pushing it anyway - hefty lens + TC + Fringer all sounds a bit...wobbly? It is on the Fringer approved list but I am wary about AF speed in particular. I had also considered looking for a used Nikon 400mm F2.8, which would be even faster (and heavier) and could couple with a TC to give 560mm F4 but again, it is that lens+TC+Fringer combination that worries me as being just too many links in the chain. Of course, what I really want is a native Fuji prime but that doesn't seem to be on the horizon - and if you look at what Nikon and Sony are doing, if Fuji do ever bring out a 500mm prime, it will probably be a small, light and cheapish F5.6, which is only 2/3 stop better than my zoom at the same focal length. Any thoughts anyone?
    • The Amazon link is an annoying feature of this forum - its automatic and is applied to every post for advertising purposes. My question was - how do you know the camera wi-fi is on and requires turning off? I would have thought this would just use up the battery for no purpose if you aren't specifically using a function that requires wi-fi.
    • I've made a point to push Angelbird memory products as they are the best performance cards you can get, The sustained write speed is important.
×
×
  • Create New...