Jump to content

Which SD Cards

mvlow

By mvlow
in Fuji X-T2 / Fuji X-T20

 Share

Recommended Posts

mvlow Explorer

mvlow

Posted
Posted

For those of you that have already received your X-T2, I was wondering what your experience has been so far with using different speed SD cards.  

 

I have several 32 GB Sandisk  Extreme Pro UHS-I cards from my Nikon system that I intend to start using on my X-T2 when it arrives.  I had thought about getting a couple of Sandisk 32 GB Extreme PRO UHS II cards to take advantage of the extra speed allowed by the X-T2, but when I saw they are $64 each instead of $21 each for the ones I currently have, I am reconsidering.

 

Most of my shooting will be single shot which will not require the extra speed, with occasional continuous high action shots.  What has your experience been so far with either speed of cards under varying shooting conditions?

Link to post
Share on other sites
Mithrandir Newbie

Mithrandir

Posted
Posted

I have the X-T2 with 2 cards LEXAR UHS-II 2000x. One is 64Gb in slot 1 for lossless compressed RAW, the other is 32Gb in slot 2 for JPEGs.

Coming from an X-E2, this is another world....

After filling the buffer at 11fps (after 3/4 seconds), the buffer is quickly emptied.

I've read before the launch that shooting at 5fps with this configuration (UHS-II cards, compressed raw on one card and JPEG on the other) give an endless buffer... and this is true, I was not able to fill the buffer (but maybe after 1 minute of shooting....)

I may post a video of the performances if you really need one ;-)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...