Jump to content

Recommended Posts

Hi,

I have an XT-20 and maybe I just never noticed it before, but I can hear a very soft motor sound 

like a phantom tiny fan or a hard drive working (no clicking noise, just a soft whoosh sound). I have gone through all the AF settings and even checked the 

sensor cleaner and mic levels. I wouldnt be able to hear it in a room with people talking or outside in a breeze.

It doesn't do this when I take the lens off (both my lenses are Fujifilm; 18-55mm and 50-230mm)

Is this noise normal or is there something going on inside the camera body that I should be concerned with?

Thanks

Edited to add: the noise stops in playback mode.

Edited by fujfinder
Addendum
Link to post
Share on other sites

  • 3 months later...
  • 4 months later...
On 12/19/2022 at 3:42 AM, djdubuque said:

Are your lens LM? if not then your hearing the focusing motor of the lens.

The 18-55 and 50-300 lenses are also IOS, so it’s likely the in-lens image stabilization at work.  The x-T20 doesn’t have IBIS. 

Edited by Edp
Link to post
Share on other sites

  • 1 year later...

If you switch off pre-af, then the motor sound should stop, and you'll also save battery. 

https://fujifilm-dsc.com/en/manual/x100f/menu_shooting/pre-af/index.html 

Like Edp says, it could also be the OIS, but you can change the IS Mode in the menu to "shooting only", instead of continuous. 

https://fujifilm-dsc.com/en/manual/x-t20/menu_shooting/shooting_setting/index.html#is_mode 

Link to post
Share on other sites

  • 1 year later...

I just got a new xs20, when I turn it on, it makes low constant whirling sound till I turn it off or when I switch to photo viewing mode. Is that normal? I tried turning off the IBIS, it still makes the sound, does your make that sound too? Please help me out, I'm worried if it's a defective piece.

PS: Noise exists with and without lens

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Thank you. I will research it.
    • Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...