Jump to content

51200 iso

fujiQ

By fujiQ
in General Discussion

 Share

Recommended Posts

fujiQ Newbie

fujiQ

Posted
  • Author
Posted

Thanks a lot for your answer Burb, I was maybe to fast or to short to explain... So Yes I find this settings in the menu and set 51200 for H...but when I turn the dial onto H ..it's still 12800 in yellow on the lcd.. and the couple T&AV dosen't change from 12800.... ?? I don't understand really..

Link to post
Share on other sites
Aswald Mentor

Aswald

Posted
Posted (edited)

You need to assign the H to iso 51200. (Extended iso). Default setting is 12800.

 

Go into setup (spanner icon in menu) and assign iso sensitivity for H.

 

Look at pg 112 of your xpro2 user manual.

Edited by Aswald
Link to post
Share on other sites
Burb Enthusiast

Burb

Posted
Posted

Thanks a lot for your answer Burb, I was maybe to fast or to short to explain... So Yes I find this settings in the menu and set 51200 for H...but when I turn the dial onto H ..it's still 12800 in yellow on the lcd.. and the couple T&AV dosen't change from 12800.... ?? I don't understand really..

If it's in yellow something is blocking the high ISO value. If you set aperture and shutter speed to fixed values. Do you have 51200?

 

Or maybe your camera is setup for only RAW shooting? I'm not shure but maybe the camera is automatically changing to jpeg if those high ISO's are selected!?

Link to post
Share on other sites
  • 1 year later...
joteroar Newbie

joteroar

Posted
Posted

I found it!

It's because of the electronic shutter! You need to select the mechanical shutter if you want to use the extended ISO values (high and low). Nothing to do with the image format. You can indeed shoot RAW higher than 12800 and also lower than 200.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Giampaolo Masserano
      Looking for Full Frame lenses to adapt to GFX

      By Giampaolo Masserano · Posted

      I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...