Jump to content

X-H1 vs X-T3 EVF

Creativestubble
 Share

Recommended Posts

Creativestubble Rookie

Creativestubble

Posted
Posted

Hi all,

Second post here would appreciate the input. I just purchased an X-T3 and X-H1.
The EVFs on paper are meant to be the same with same refresh rates when in boost mode.

The sizes are also meant to be almost exactly the same at 0.50 inches X-T3 and 0.48 inches X-H1 with the same resolution.
However the X-H1 EVF feels smaller (bigger black border around the edges) and not as clear. It also gives me eye strain after just a few minutes. (I have adjusted diopter). It feels like its further away if that makes sense?

Has anyone else noticed a difference between the EVFs when using them side by side because on paper they are meant to be the same. Perhaps its just this particular X-H1.

Thanks,

Link to post
Share on other sites
Herco Rising Star

Herco

Posted
Posted (edited)

Fuji claims that it is exactly the same EVF (Sony-made OLED), but to my recollection the refresh rate of the X-T3 is a bit higher. The main difference (re. the EVF) is the processor of both cameras. The X-T3 has a later generation processor that allows for higher refresh rates. Make sure both cameras are in 'boost' mode when you compare them. Also other features (like brightness and color setting) can cause difference in EVF experience as well as minor changes in the optics in front of the EVF. Fuji isn't specific about changes re. this.

I can't compare anymore since I sold both cameras and switched. From that experience I can tell that the same EVFs on paper can make a great difference in practice. So, always check the EVF yourself before you buy a camera. Esp. when you wear glasses or need to change the diopter.

Edited by Herco
Link to post
Share on other sites
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • jerryy
      Chilly

      By jerryy · Posted

      (Open Thread) Not a winter landscape, but still cold.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • jakabasej8
      Fujixt4 icon unknown lower left corner

      By jakabasej8 · Posted

      agreed on the upload but based on the location and number it sounds exactly like the storage slot 1 status icon
    • thelostkiwi
      XS10 and manual lenses

      By thelostkiwi · Posted

      All three of my bodies (X-E2, X-T4, GFX100S II) have shoot without lenses enabled and they have all had it set since I bought them.  No harm in it at all. Just remember to set the focal length when you fit a manual lens with no electronics otherwise the IBIS (if you have it) goes nuts. I regularly use vintage film lenses from Minolta, Zeiss, Mamiya, Rollei and others on my X mounts along with more modern manual focus stuff from TTArtisans. I also use Nikon AF-S lenses with a Fringer so the world is your oyster! Vintage lenses can be an absolute bargain too - For example the Zeiss 135 f/35 in M42 is as cheap as chips and very sharp as is the excellent Minolta 35-70 Macro (which is also rebadged Leica). 
    • Neil Rosenberg
      Infrared Photography on X-E2 665nm

      By Neil Rosenberg · Posted

      I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Tschortschli
      Screen is flipped with fan001

      By Tschortschli · Posted

      Hy there When Im using the fan001 on the XH2s and I flip the LCD Screen vertically by 180 degrees then the image flips vertically, what is good but it also flips horizontally. The clean feed on HDMI is not flipping horizontally but its also flipping if the HDMI output info display is on. When I unmount the fan then the image flips only vertically. My firmware is updated to the latest version. Any ideas if there is a fix for that?
×
×
  • Create New...