Jump to content

XT4 Q button

JohnB1952

By JohnB1952
in Fuji X-T4

 Share

Recommended Posts

bem Collaborator

bem

Posted
Posted (edited)

Did the Q-button (that display the Quick menu to  view or change the options selected
for frequently used menu items) work with the previous firmware (1.01?) in Your X-T4?
Is it maybe some answer on this problem in the X-T4 user manual?
If not maybe a firmware problem?
If not maybe a hardware (button?) problem?

Try redefine what button is used as Q-button and see if then works? Redefine to another then defalt button to right of Rear command dial.


/Bo

Edited by bem
Link to post
Share on other sites
JohnB1952 Rookie

JohnB1952

Posted
  • Author
Posted (edited)

PROBLEM SOLVED RE Q button

I noticed a small yellow padlock displayed on LCD which is active when "controls have been locked"

To use this lock feature press and hold the Menu/OK button to activate and/or deactivate.

I switched it off and the Q button now works !!!!!!!

How it was switched on is a mystery to me but at least Q is now working.

 

Edited by JohnB1952
Link to post
Share on other sites
bem Collaborator

bem

Posted
Posted

So it was this lock You by accident had activated?
/Bo

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites
  • 4 weeks later...
  • 1 month later...
Tone Newbie

Tone

Posted
Posted

Thanks so much! My Q button was usable the day I bought my new Xt4 then whilst I was playing with the settings I disabled it somehow and didn't know what I'd done. You just made my day since I hadn't been able to work out how to get it back. I had noticed the lock on also but hadn't looked thru the manual yet to see what it was. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...