Jump to content

Recommended Posts

Hi,

 

Probably a stupid question but does anyone have a trick to remember which direction to spin the EC dial?

 

I find myself looking at the gauge in the viewfinder and trying to spin right to increase exposure (spinning right actually decreases it). So I have to either picture the numbers on the top of the dial and spin toward a number (ignoring the vf gauge) or just condition myself to spin the opposite direction that I would intuitively spin.

 

I remember when I switched to Nikon from Canon a while back being irritated that the Nikon viewfinder gauge was backwards (+ to the left and - to the right) until I discovered that "zeroing the meter" meant spinning the wheels in the direction I wanted the gauge to go. Then I came up with thinking "brighter to darker" rather than "+EC to -EC" and everything fell into place.

 

Thanks, Mike

Link to post
Share on other sites

I find myself looking at the gauge in the viewfinder and trying to spin right to increase exposure (spinning right actually decreases it). 

 

Um… Spinning EC wheel to the right actually increases the exposure. Just use a rightward motion of your thumb.

Link to post
Share on other sites

i imagine you're picturing it by looking at the top of the EV dial and spinning with two fingers as: left (counter clockwise) and right (clockwise). i would forget seeing it that way. just imagine it as a rear thumb dial on the back of a DSLR. thumb slides left to under compensate, and thumb slides right to over compensate.

 

(Sent from another Galaxy)

Link to post
Share on other sites

Yes, Romi, I think that is kind of what I picture. It is that as soon as I put my forefinger on the dial it wins my brain for direction. Then confuses me because my eyes are seeing the indicator move the wrong way in the viewfinder. I guess it's like backing up a trailer. I need to put my hands on the bottom of the wheel so I know when I turn the bottom of the wheel left the trailer is going to go left - if my hands are on the top of the wheel I get confused more easily.

 

Marcelo, yes the visual feedback on the image has queued me in to going the wrong way numerous times - though only if I'm doing a large amount of EC. I'm just trying to figure out a way to picture what I'm doing where I'll feel more confident in applying EC spur of the moment and less like I might miss a shot of I try. Often I find myself knowing I am going to get a bad exposure but not wanting to possibly miss "the shot" because I've accidentally made it worse by going the wrong way.

 

Thanks,

 

Mike

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Thank you. I will research it.
    • Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...