Jump to content

Newbie Needs Help

templedog

By templedog
in Newbie / Self Introduction

 Share

Recommended Posts

templedog Newbie

templedog

Posted
Posted (edited)

Hello, 

I am returning to photography after a twenty year hiatus. 

I just bought the Fuji X-T2 with the 16-55 f2.8 lens.

I am going to shoot a play tonight and I don't have enough time

to learn the camera, there have been many changes over the last

twenty years. LOL.

What would be my best settings for consistent photos under adequate stage lighting?

Thank you, Joe

Edited by templedog
Link to post
Share on other sites
templedog Newbie

templedog

Posted
  • Author
Posted

LOL.....Thank you, fseaver. 

I actually went with Auto ISO (6400 max), Auto Shutter, and kept the Aperture on manual, I mostly used f2.8.

I chose Pro Neg Std and got some very pleasing results.

My first camera was a Canon F1N. I have had so many manual film cameras in my life

that I was so pleased to see Fuji get back to basics with their control dials.

I am very pleased with this camera.

Cheers, Joe

Link to post
Share on other sites
  • 2 weeks later...
templedog Newbie

templedog

Posted
  • Author
Posted

Thank you, George_P!!

I bought it last month (August) for 1,090 USD dollars. It was on sale because the X-T3 was waiting in the wings.

Also, picked up the 16-55 f2.8 WR lens for same price.

I'm amazed at how many features and buttons this beast has! The learning of it is taking me forever!

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...