Jump to content

ARTICLE: World's end: Spain's wild north edge with Fujifilm XT-2

Jose Carpin

By Jose Carpin
in General Discussion

 Share

Recommended Posts

Jose Carpin Rising Star

Jose Carpin

Posted
Posted

Hi folks, 

 

Before starting the trip driving my car up north in Spain, I obviously had to think about what gear I should take with me. My goal was clear: I wanted to shoot original landscapes in the north coast of Spain, specifically in the province of Asturias.
 
Nowadays I am a Fujifilm photographer, which means two things: firstly, I am highly proud of owning a Fujifilm gear, which is outstanding in terms of quality and shooting experience, and furthermore because I’m in love with the quality and design of my FUJIFILM XT-2 and my lenses too.
 
I knew I would mostly shoot landscapes, so before going up north to Asturias, I took a good decision: I sold my small and sweet pancake Samyang 12mm f/2 and then, I bought the legendary FUJI XF10-24MM F/4, and yes, it was a great. The XF10-24mm is more convenient for landscape photography; the focal range helps to reach far scenes where it’s impossible to get with a prime 12mm lens; for example shooting rocks in the water during a high tide.
 
 
Come check out my website too: www.josecarpin.com
 
Let me show you some pictures that you will find reading this article:
 
 
 
33320571244_f03129d52c_c.jpg
 
 
34163113295_0a55080644_c.jpg
 
34314114286_3a65eb30a5_c.jpg
 
35051729701_e0ae4fc187_c.jpg
Link to post
Share on other sites
  • 1 month later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Posts

    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...