Jump to content

Recommended Posts

I have ordered the Canon EF 400 f5.6L and a K&F adapter to hopefully give me longer-range option on my X-T4. I had the lens previously when I owned a Canon body but found it frustrating without any IBIS or lens IS as it's not the fastest of lenses at f5.6. This is going back some 10 years or so. I've subsequently changed from Canon to Sony then to Fuji. I'm very happy with my X-T4 but I have found the few native Fuji lenses I've tried to be disappointing in one respect or another and I definitely haven't the cash or incentive to try the Fuji 150-600 so I'm going the above route as I know the Canon lens is good under the right conditions and 2nd hand ones are a steal at the present time but I note that they seem to be selling quickly on MPB - they had 4 last week and now there's just 1 left. Maybe other people are thinking the same way? The X-T4 of course has IBIS and there is Topaz for high ISO noise when light conditions require cranking up the ISO, neither of which were available when I was using the Canon EOS system. Hopefully I shall be happy with the Canon 400 and adapter with a combined cost of half that of the Fuji telephoto lens albeit with 200mm less of focal length.

I shall be posting my results here as soon as I am able (probably within a couple of weeks) and hope that others may find this of interest, particularly with regard to autofocus and IBIS on this combination. Just to note, my other prime lenses are both Viltrox - 13mm and 75mm and I am very impressed by them.

Edited by BobD
Link to post
Share on other sites

Welcome to the forum.

That is a really good lens, hopefully it will give you many great images.

You did not mention which K&F adapter are getting, they make several, but not all of them have the aperture control ring on them. Since that lens does not have an aperture ring, the price for the adapter with the ring (if you want it) is not much more than for the one without the ring.

I am mentioning this so that if the menu does not allow you to change f-stops for that lens - adapter combination (the lens will stay wide open for every shot), it is still possible to get it to work.

Best wishes.

Edited by jerryy
Link to post
Share on other sites

13 hours ago, jerryy said:

Welcome to the forum.

That is a really good lens, hopefully it will give you many great images.

You did not mention which K&F adapter are getting, they make several, but not all of them have the aperture control ring on them. Since that lens does not have an aperture ring, the price for the adapter with the ring (if you want it) is not much more than for the one without the ring.

I am mentioning this so that if the menu does not allow you to change f-stops for that lens - adapter combination (the lens will stay wide open for every shot), it is still possible to get it to work.

Best wishes.

I've ordered the AF version without aperture ring as I found it at a very good price (new). I'm reasonably confident I can make aperture changes in the camera menu however if that turns out to not be the case I'll probably sell the adapter and get the other version, or possibly the Fringer, with the ring. TBH with the weather/light conditions we've had in the UK for some time now I'll probably find shooting at a constant f5.6 obligatory.

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

The adapter has arrived and I've been testing it on the X-T4 with the EF 400 f5.6 and so far I can't really fault it. Autofocus speed and accuracy is excellent, albeit tested only on single point focus, which is what I use 95% of the time. I can't comment on face or eye AF as I haven't tried it and I'm not a big fan of either anyway - just not features that I use. So far the lens is 'fixed' on its widest aperture of f5.6 but that has not been an issue for me at all so far and I have noticed during experimenting with camera settings that it has stopped down by itself for reasons that I am unsure about to be honest however it's very early days so it may be that there is potential to be able to alter the aperture on demand if I actually want or need to. I have yet to find any issues to make me wish I had gone for a considerably more expensive adapter with aperture ring. Attached jpeg, which has been through Topaz Photo AI and cropped, shows what this combination of lens and adapter can do

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

.

Edited by BobD
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • Anyone out there have any experience/feedback on the Laowa 55 mm tilt shift? I’d be using it on the GFX 50s ii. 
    • Hi, I'm researching a gimbal to get someone as a present & they use a Fuji XS-10. I did a quick search of previous threads on gimbals but all of them seem to either get no replies or spammed by a link to an Amazon list. I'd appreciate any comments from folks who've actually used specific gimbals with the XS-10. I'm aware that some, such as certain models from Zhiyun, DJI & FeiyuTech either don't say that they are fully compatible with the XS-10 but other sites say they do work ok but some functions don't. It's quite difficult to work out which functions work & which don't. Thanks.
    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • This was snapped during a lunch.  Total shooting time—a few seconds. We so often read that a proper "portrait" should be snapped with a longer than normal lens, a low ISO to get lots of detail, and have a soft light held up above the head, and slightly to the side. The key, in my opinion, is always carry a camera.  Have your camera available to capture candid, authentic photographs.  Available light, no posing.   This portrait used 2000 ISO, the lens wide open at f4, and 1/100 sec. to stop any movement.  I didn't even take time to compose—I just snapped.  I leave the "Face Detection" on unless I'm photographing a landscape or subject other than a person. The GFX100RF has the equivalent of a 28mm lens.  The large sensor renders fine detail even at fairly high ISO ratings.  And the drawing of the lens is just perfect in my opinion.  It was set to B & W, with slightly reduced sharpness and clarity (set in-camera).  Ideal for "portraits."  Now, for some subjects I will likely increase the sharpness and clarity to the normal setting.  The camera is new, and I'm still experimenting with it.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

×
×
  • Create New...