Jump to content

Recommended Posts

Hello,

I recently picked up an X-T5 and wanted to Geotag photos.  I've got  the app, and after some amount of fiddling, it seems to be working - sometimes (although not all the time).

I liked the idea of just getting a GPS Data Logger that was small, always on and I could throw in my pack or into my motorcycle so I could import the GPX later into Lightroom and tag all photos.  But it seems in the past 2-3 years almost all of these devices have been discontinued.  I'd rather not use the phone because this would just burn up the battery too fast in general and I'd always have to be fiddling with it - turning an app on manually all the time.

But now I'm not sure of a good device option otherwise.

Two questions - 1 - can I force the geo location from the X-T5 to update somehow?  It holds the last position too long so the accuracy ends up being very much not helpful.   If there WAS a way to force it to update then I could make this work.  But 60 minutes later - I could be 75 miles away from that last tag.

I also have an Apple Watch with the GPS ability that I haven't turned on.   I wonder if I activated that and let the Apple Watch do the work vs. the iPhone if that would work somehow.   Anyone done this?  I see posts about a Garmin Fenix being used for this purpose.

Thanks

 

 

Link to post
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • Hey everyone, I am new to the fujifilm system, and I just received my X100vi about 15 days ago, and yesterday I noticed that ISO and exposure dials are acting up. I spent hours watching YouTube videos and reading forms without finding any solutions. Using ChatGPT or Gemini also didn’t help. My issues are the following: If I want to set my ISO at a specific value then the camera LCD/EVF shows a totally different value. For example, I have shutter manual, aperture manual and ISO dial at 6400, the camera shows ISO at 4000, when I take pictures it will show ISO at 4000 and not 6400. When I try to choose another ISO value it will skip some of the available values that are shown on the dial. Another issue I am having is when my exposure dial is not set at specific value, then I cannot set ISO to Auto no matter what value I select on the dial. If I do select the different exposure compensation values, then I choose A for ISO, the camera will activate the front commend dial to manually change ISO values. To get in Auto ISO, the shutter speed cannot be set in auto and the ISO dial should be set at 125, when I turn the ISO wheel, it seems like the numbers are misaligned by one value, If I put the dial on A with shutter speed manual, then it will trigger the front commend dial. The other issue that I am having is when I have Aperture, shutter speed and ISO on manual, If I change the exposure dial compensation + or - , it actually changes the exposure of the picture as well as the ISO value, which as I understand, if Camera is in full manual, the exposure dial should do nothing. The last issue that I am having, if I do have ISO in manual at a set value, and adjust exposure compensation dial, it alters my ISO instead of my shutter speed or my aperture, even though ISO is in Manual and the other two dials are in Automatic. I am not really sure if all of this is by design and I am just not understanding how everything works together, but it seems really odd how everything changes. Resetting the camera settings didn’t help. 
    • I also have the eaxct problem with my X-T5. The remote used to work, but not anymore. I also get the light coming on on the camera back, and autofocus will happen, but no shutter release. Since I use the 2 or 10 seconds timer more I don't know if a firmware update is the cause of this negative change. I actualley only use the wired jack-remote for action release on a tripod.  Did anybody find a cause, and even more assisting, a solution?
    • I have the same issue. Have you found the the solution?
    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • On my XPro 2 the rear command dial, when pressed, can cycle through 3 different magnification levels in the OVF.  
×
×
  • Create New...