Jump to content

New X100VI User, Some questions

Photolandscape
 Share

Recommended Posts

Photolandscape Newbie

Photolandscape

Posted
Posted

I had lusted for the X100VI for months. I am going to Japan in November, and after lugging my main camera and lenses around Europe for 25 days last month (Hasselblad X2D), and being 71, I decided it was time to get a new, affordable street/documentary camera. I logged on to BH and lo and behold, found a black on immediately. I have had it for three days and have some questions/comments:

--I can't foresee ever using the video features. Is there any way to delete them from the menus?

--I find the menus to be, to put it nicely, almost impossible to wade through and interpret. Reminds me a lot of my wife's Lexus--great car, poor user interface. So my question is: is there any way to delete some of the data presented on the LCD screen--specifically, along the top where I see "4K29.97" and "5h10m30s"? I assume the "1142" I see just to the right along the top refers to how many images I can record on my SD card? And there is a little window on the right that says "Shot". What does it refer to and can I delete it?

--And one more if I may--IBIS. It looks to me like IBIS only works with the Video side of the camera, not still photography. Is that correct? I can't figure out how to activate it for still photography.

If I can solve these issues it would be a big help. I've gone through the entire 360-page digital manual but I haven't found answers to these questions.

 

Thanks in advance, Steve

 

Link to post
Share on other sites
Greybeard Experienced

Greybeard

Posted
Posted
4 hours ago, Photolandscape said:

--I can't foresee ever using the video features. Is there any way to delete them from the menus?

No but its easy enough to ignore them

4 hours ago, Photolandscape said:

And there is a little window on the right that says "Shot". What does it refer to and can I delete it?

Thats for the touch screen - if you don't want to use it go into the Setup => Button/Dial Setting menu and turn it off

4 hours ago, Photolandscape said:

--And one more if I may--IBIS. It looks to me like IBIS only works with the Video side of the camera, not still photography. Is that correct? I can't figure out how to activate it for still photography.

IBIS for stills is controlled in the Shooting menu under IS Mode - you can choose Continuous or Shooting Only

Link to post
Share on other sites
Greybeard Experienced

Greybeard

Posted
Posted
4 hours ago, Photolandscape said:

So my question is: is there any way to delete some of the data presented on the LCD screen--specifically, along the top where I see "4K29.97" and "5h10m30s"? I assume the "1142" I see just to the right along the top refers to how many images I can record on my SD card?

 

In the menu Setup => Screen Setting menu under Disp. Custom Setting you can control what appears in the LCD screen.

And yes the 1142 is an estimate of images remaining (you can get rid of that as well if you don't want it)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Neil Rosenberg
      Infrared Photography on X-E2 665nm

      By Neil Rosenberg · Posted

      I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Tschortschli
      Screen is flipped with fan001

      By Tschortschli · Posted

      Hy there When Im using the fan001 on the XH2s and I flip the LCD Screen vertically by 180 degrees then the image flips vertically, what is good but it also flips horizontally. The clean feed on HDMI is not flipping horizontally but its also flipping if the HDMI output info display is on. When I unmount the fan then the image flips only vertically. My firmware is updated to the latest version. Any ideas if there is a fix for that?
    • Neil Rosenberg
      Infrared

      By Neil Rosenberg · Posted

      In reply to the original question, it all depends on what you mean by infrared.  If you mean "see thermal information", then I agree with the comments here.  However, if you mean near-infrared, the X-T4, or basically any digital camera can be modified to "see" it.  Check out Lifepixel.com and Kolarivision.com for more info. As regards lenses, I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Greybeard
      XS10 and manual lenses

      By Greybeard · Posted

      No - I don’t think so - it means you can take pictures if you remove the lens completely - but I’m not sure that is a problem
    • mcewena
      XS10 and manual lenses

      By mcewena · Posted

      I bought a manual lens over xmas and it took me a while to find the "shutter w/o lens" function in the menu settings.  So far I haven't found a way to either put that on the Q menu or marry that setting to one of the 4 custom modes.   Am I missing something? Is there a problem if I just leave that setting enabled even when the OEM auto lens is in place? tia
×
×
  • Create New...