Jump to content

Fittest L-Bracket ebay - DONT BUY!

Mb.kinsman
 Share

Recommended Posts

Mb.kinsman Apprentice

Mb.kinsman

Posted
Posted (edited)

The Fittest L Bracket with grip for the X-Pro2 does NOT work in RRS BH-55 bullhead with lever clamp. The bottom plate grooves are too thin and the Camera will slide right out of the locking clamp. Also the Grip does not fit properly to the X-Pro2 body. They need to modify the design: The grip needs to be redesigned or just removed. The Bottom plate arca swiss groove need to be thicker - like the short side bracket - which DOES work in the lever clamp. For the time being I would strongly recommend - DO NOT BUY if you use a lever clamp on a RRS bullhead.

Note the short bracket also BLOCKs the PC port - they need to modify that bracket too if you want access to the port.

Regards,

Mark

Edited by Mb.kinsman
Link to post
Share on other sites
  • 2 weeks later...
Francisco Evangelista Rookie

Francisco Evangelista

Posted
Posted

You're welcome! Should have a revised version of the L-plate in a few weeks and I'll report back.

i prefer this design to ishoot l-plate,i am seeing this one http://www.aliexpress.com/store/product/Free-Shipping-Custom-L-Bracket-L-Plate-Camera-Holder-for-FUJIFILM-XPRO2-FUJI-xpro2-Vertical-Plate/423578_32660429157.html 

 

is it the revised version?

 

Thanks

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...