Jump to content

Recommended Posts

Hi,

 

I have an x100t with the TCL-x100, and the combo is (really!) great for still shots, however trying to keep up with my kids is another story.

 

Set to zone focus, high performance ON, face detection OFF and Focus priority, it feels like the camera is almost there, but just not fast enough, so I miss a lot of shots.

 

So, I know I am in the x-t1 forum, should I be able to get better results with an x-t1 and 35mm 2.0 WR combo? Are the 4.0 firmware improvements, as well as the new lens just the thing that leaves the x100t in the dust?

Link to post
Share on other sites

Even before the FW 4.0 the X100T felt a bit sluggish next of the X-T1, after the new FW, the differences in AF speed gets very apparent.

 

I have 2 sons, one is about 2 weeks old, the other is 6 years old. So far, even the 35 F1.4 is just fast enough to keep track with both, if I miss a shot it is mostly because of my own mistake. The 35mm F2 version is faster, not THAT much faster, we are speaking of a couple of 1/10th of a sec faster tops but every now and then, it makes a difference.

Link to post
Share on other sites

I have an x100t with the TCL-x100, and the combo is (really!) great for still shots, however trying to keep up with my kids is another story.

 

et to zone focus, high performance ON, face detection OFF and Focus priority, it feels like the camera is almost there, but just not fast enough, so I miss a lot of shots.

 S

Hi!

Could you give exifs of some of your missed shots?

Link to post
Share on other sites

Thanks. I am a bit surpirised that you don't consider the 2.0 that much faster than the 1.4. I thought the difference was much more pronounced.

 

It really depends on the situation, on a low contrast subject the F2 will be much faster and accurate while the older F1.4 will hunt a lot more.

 

But on good conditions, both lenses aren't that far appart from each other. I would say that F2 hunts for focus a lot less often but it has a slight tendency in my hand to back focus more often for some reasons, I just need to re-frame and it works just as good and not really loosing much time.

Link to post
Share on other sites

I've used both 1.4 and 2 and I think 2 is at least 30% faster if I had to put a number on it.

I wound up selling the 1.4 and keeping the f2.

As far as the back focusing is concerned, I think it's more of a general Fuji thing than the lens.

My X100S does it frequently, my XT1 occasionally.

Link to post
Share on other sites

Even when you have your subject in the focus point, the background scene sometimes gets focused on. This happens in AF only.

It doesn't happen too often to me since I know to check before pressing the shutter, but if I give to someone else to take a picture of me, I'm out of focus half the time.

Link to post
Share on other sites

Back focusing? I thought that was "impossible" with mirrorless cameras.

 

It is rather uncommon but it also depends on how you setup your AF, zone, single point, the size of the single point too. That's a lot of different parameters that could cause the camera to get distracted and focus on the background instead of the subject in front. 

The only difference with mirrorless, you can see immediately that you are out of focus in the EvF or LCD, while on DSLR, it's not always the case.

Link to post
Share on other sites

Back focusing? I thought that was "impossible" with mirrorless cameras.

I was surprised too but David Busch writes in his book "Mastering mirrorless interchangeable lens": Several mirrorless cameras have a AF microadjustment.

Which I didn't know.

But before thinking of an Af issue with a lens, it's better checking if all of the AF technics are mastered. For example choosing the best AF frame size depending on the situation.

Link to post
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
×
×
  • Create New...