Jump to content

Viewing

Sisyphus

By Sisyphus
in General Discussion

 Share

Recommended Posts

Sisyphus Newbie

Sisyphus

Posted
Posted

Hi

First time posting on here, I own the XT2 and XH1 when viewing images the XT2 images seem to be better magnified than on the XH1 also, It would appear the XH1 under exposes by one stop, whilst the latter means I have to expose 1 stop over is there anyway to get the XH1 to magnify the image more. Oh this is after pressing the rear command dial to magnify the image.

Link to post
Share on other sites
jerryy Grand Master

jerryy

Posted
Posted

It is true the magnifications are different.

X-H1 specs: Magnification: 0.75x with 50mm lens (35mm equivalent) at infinity and diopter set to -1.0m-1

X-T2 specs: Magnification: 0.77x with 50mm lens (35mm equivalent) at infinity and diopter set to -1.0m-1

There are gadgets called viewfinder magnifiers that are supposed to do as their name suggests, magnify the image in the viewfinder, similarly for the lcd monitor. Check with your favorite local camera store or online store or use a search engine to get an idea of what is involved in using them.

https://fujifilm-x.com/global/products/cameras/x-h1/specifications/

https://fujifilm-dsc.com/en/manual/x-t2/technical_notes/spec/index.html

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • thelostkiwi
      X70 any active forums for this camera?

      By thelostkiwi · Posted

      I never knew the X70 existed! Looks interesting.
    • MYH
      Can't connect to XApp

      By MYH · Posted

      Equipment: Fujiflim X-M5 (firmware V 1.10). iPhone 15 pro (26.1) I am unable to properly connect my Fujifilm X-M5 to XApp on my iPhone 15 Pro. This setup previously worked without issues, but now the app only supports a basic remote shutter and no longer allows Get or Take mode, which are required for remote parameter control and shooting. I have repeatedly Initialized “FUJIFILM XApp”, re-paired the camera, reset wireless settings, and confirmed the camera is not in airplane mode, with both devices placed next to each other. None of these steps resolved the issue. Also, I am unable to update the camera firmware, as the process always fails with a “connection failed” message. I need clarification on whether this is a known firmware or compatibility issue and what the actual solution is.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

    • jerryy
      Fall pictures

      By jerryy · Posted

      Last day of autumn 2025. Autumn is gradual. Summer field crops slowly ripening. Cool, longer nights turn into morning fogs. Color (colour) touches here and there taking the place of flowers now resting until Spring. Then, after that slow introduction, Fall is everywhere. Winter is brash, Winter is not at all subtle. Freezing cold days and colder nights. The Sun struggles to get above the horizon. Bare fields, iced over streams and woe (‘Woe!! I say!’) to trees or shrubs holding onto leaves.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

        But there is sledding, skiing and hot chocolate for those that like those things 😀.
    • jerryy
      Fall pictures

      By jerryy · Posted

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

      Winter is coming.
    • Sailortim
      Exposure Compensation Dial vs Display

      By Sailortim · Posted

      For some reason, the EV dial setting does not correlate to the EV setting displayed in the viewfinder.  My XT2 used to have parity between settings such that when the dial was at "0", the viewfinder also showed "0".  Has anybody else noticed this?  I've tried a reset of the s/w but no luck.  
×
×
  • Create New...