Jump to content

I've got an X-Pro2 right now...anything you want to know?


Recommended Posts

Sorry about that....i just thought maybe due to elec shutter you may have to use the rear LCD screen.....Im thinking SLR.

 

But as range finder that doesn't come into it. Is that correct.

 

Best

 

G

Yes, I think you are thinking of live view with mirror up on a DSLR. Using the electronic shutter, you can still use the OVF, EVF, or LCD. Think of the electronic shutter as more of a virtual shutter with no moving parts. The only noises you will hear come from the lens; aperture blades and focusing motors. These are the same noises you hear when half pressing the shutter button. Hope this helps clarify it. 

Link to post
Share on other sites

Because, Fuji chose to do that this way, the electronic shutter in incompatible with certain functions of the Fuji cameras.

 

Just to clarify this a little bit with technical information. 

 

As the electronic shutter is not a "global shutter" it has technical limitations that make it unsuitable for certain features of the camera or certain things you expect from a shutter as one might be used to.

 

The electronic shutter in Fuji cameras works by reading the sensor line by line, which takes a certain amount of time. It is not a "snapshot in time" but a "window of time, where a snapshot of time is only a few lines of the sensor readout", which means that for example a flash exposure which has a burst of light much shorter than the readout of the whole sensor will only illuminate a certain amount of lines on the sensor. Similar but not the same to the effect you see when you choose a shutter speed above the flash sync speed with the mechanical shutter. You'll also get the "rolling shutter effect" due to the slow readout.

 

This would all be solved with a global electronic shutter which can read a snapshot in time from the whole sensor in one go. This is not possible with the sensor technology that is in the Fuji (and most other) cameras.

 

Regarding noise: the electronic shutter is absolutely noiseless. There is no sound AT ALL emitted from the shutter itself. If you put a manual lens in front of it, there is also no lens noise. 

 

That the Fuji cameras have a digital noise set for the electronic shutter has probably to do with legislation in some countries (like Japan and South Korea) which legally require a camera manufacturer to add a noise to the action of an image being taken. It generally can be turned off by the user, I have not looked up what the legal situation is for this in said countries, but it's not Fuji's responsibility anymore. 

Edited by cug
Link to post
Share on other sites

So far its great!  

 

Looks good with my old X10

 

G

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Edited by spinneyhorse
Link to post
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Posts

    • Hopefully these will help some. For quite a while now Apple has put stuff into their operating system so that you cannot yourself open the connected camera’s card and see the images, you have to use their or third party software to do that.
    • Thanks for the instructions:  I was doing up to 3 successfully but can't wait to get home and try  4 and 5 and report back. Cheers, John
    • Okay, just for completeness sake: 1.     The camera’s menu connection setting is USB CARD READER. 2.    The computer is turned on, booted and nicely operational. 3..    With the camera turned off, connect the camera to the computer using a known-to-be-good USB C data plus power cable (a data only cable should work as well, a power only cable will not work). 3.   The camera’s charging light may turn on. Turn the camera on. The back screen probably will show the USB symbol as well as the USB letters. 4.    Start up the Image Capture app and see if the camera’s name appears in the devices list. 5.    In the Apple menu, select ‘About This Mac’, click on the ‘More Info…’ button, and on the right hand side of the window that opens, at its bottom is a button called ‘System Report…’, click on it. A new window should open, the left hand side has collapsible dropdown listings, the first is called “Hardware’, within it is the USB listing, select that. The right side pane should give you listings of all the USB devices connected at that moment, one of them should say something like USB PTP Camera. Does either 4. or 5. work?
    • Thanks, Yes I knew about the USB issue in newer Macs and macOS but that is why I tested it with High Sierra as well. Also the fact that every other camera easily connects via USB direct with the camera - definitely points out the fact that it is a FUJI specific problem.  Furthermore - I remember being able to direct connect early last year. I rarely take the Cards OUT of the camera  these days. The weird thing is I can connect my iPhone 15 via USB-C to 100s and pull files directly - puzzling. Problem is FUJI rarely listens to anyone.    
    • Hi all, I notice that there are some focusing sound on my XF33 despite it being said as completely silent in many review. The focusing sound is kind of like stepping motor sound, and it only appears when I’m shooting photo. I try shooting near and far away and there is sound. However, it is completely silence when I shoot videos. Is it normal or do I need to change some of my setting? Or am I just getting a not too good copy haha. please assist me with the matter guys! Thanks!
×
×
  • Create New...