Jump to content

X-T200 Auto Focus Issues: nighttime videography


Recommended Posts

I use this camera for vlogging, and very rarely take still photos.  I'm having issues with nighttime video and auto focus. The camera hunts for focus excessively particularly during fireworks displays and other nighttime settings (amusement parks, cruise decks, etc.).  I have it set to continuous auto-focus.

Pretty much about to give up on this camera.  What are the recommended settings for this camera for video at night? Or do I need to use manual focus (or is that even possible for video)?

Thank you!

 

Link to post
Share on other sites

you might expect too much out of any autofocus system...at night, with the subject dark and backlit? maybe a canon R3 might be able to achieve focus there...but certainly no low/mid tier fuji or any other brand for that matter

if you're vlogging, try manually focusing and maybe stopping down a bit to get adequate depth of field

Link to post
Share on other sites

Are you using the XC 15-45mm kits lens?

That may be what is giving you some troubles, that one is not Fujifilm’s fastest focusing lens. It does have some low light issues while the body does fine when you put a faster focusing lens on it. Which lens to use depends on your budget and which focal range (how you intend to use it) you want. The XF 16-50mm is a constant f2.8, the 35mm f1.4 or 23mm f1.4 are well regarded for low light settings. The XF 18-55mm does fine work, but is not as fast as the others I mentioned.

Stopping down means setting a higher number f stop on the lens (or use the body to control the lens — you turn this on using the menu settings).

Link to post
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Posts

    • The Tentacle Sync Timecode tool is the one I tried. I couldn't get it to work. But that is probably my fault, not the software. I seemed to get a file, but I couldn't turn it into anything meaningful. 
    • I am glad to read you are able to get this up and running. Pretty much as long as you connect the camera and turn it on and wait a few moments for the computer to register the connection, you can then use Image Capture (which actually is a very decent program with a lot of options for transferring images from cameras to the computer) or Lightroom or other programs to move the images to your library. There are some drawbacks; connecting to the computer while it is in sleep mode will waste your time, the connection will not get recognized— you will have to unplug the camera, wake the computer and start over. Trying to connect while the screen saver is running may work, it may not, often not. If the computer goes into screen saver mode while the camera is connected and sitting idle, it usually stays connected when coming back out of screen saver, but if the computer mputer goes into sleep mode, the connection gets dropped and you have to unplug it and start over. I suggested having the camera turned off while connecting, this is to lower the possibility of static electricity discharges frying either the camera or the computer or both. A lot of times you can connect while the camera is turned on, but not always, sometimes you have to unplug, turn it off, reconnect and turn it back on. A lot of this comes from Apple’s approaches towards keeping USB devices from hijacking your computer, some is just hubris and some is from the vagaries of chance. p.s. Your laptop should be able to connect to the camera.
    • Hi Chas, I am just fallen into the rabbit hole of investigating how to upgrade my X-T4's video sound... Loving the idea of time code sync, I am now quite concerned that the X-T4 doesn't support it, although I have already seen different statements on the net, like here:  https://youtu.be/xja27RmvbhE?si=hIch3Tu_MH_pWSBH&t=571 I have to admit, this guy's "explanation" gets quite confusing in his further discourse ...:) BUT, as you wrote that you use Tentacle Sync for Windows!, did you also try with their windows-only software "Time Code Tool" which you find here?: https://tentaclesync.com/timecode-tool   Would love to here if you found a workaround with the XT4 Best, Simon
    • It occurred sometime when I focus. It is not silent 
    • This is the video for the focusing sound. Anyone can help?🙏🏻🙏🏻🙏🏻thanks a lot IMG_3226.mov
×
×
  • Create New...