Second post here would appreciate the input. I just purchased an X-T3 and X-H1.
The EVFs on paper are meant to be the same with same refresh rates when in boost mode.
The sizes are also meant to be almost exactly the same at 0.50 inches X-T3 and 0.48 inches X-H1 with the same resolution.
However the X-H1 EVF feels smaller (bigger black border around the edges) and not as clear. It also gives me eye strain after just a few minutes. (I have adjusted diopter). It feels like its further away if that makes sense?
Has anyone else noticed a difference between the EVFs when using them side by side because on paper they are meant to be the same. Perhaps its just this particular X-H1.
Just purchased an X-H1 (long time X-pro2 user) - seems a very nice camera. It seems the processor is a bit slower than my pro2. Software is 2.13.
Question, is there any way around EVF blackout (besides at CH @ 11fps?) Its really distracting. My Pro2 does not do this at all.
I've just updated my X-Pro1 firmware from 3.80 to 3.82 and now changes in DISP. CUSTOMS SETTING are only seen in LCD and not EVF or OVF ie lots of the options are no longer available.
I've emailed Fuji but had no response so far. In fairness that may be because our local branch is located in a Covid lock down area.
I'm hoping that Fuji will fix this issue. In the mean time does anyone know if it's possible to revert back to 3.80? It's not something I want to experiment with and risk making the situation worse.
Hi all !
After updating via app (1.23) my brand new x-t4 (work like a charm with 1.22 firmware) the EVF doesn't work at all now and if i try to switch to the EVF view every thing goes black and the camera get stuck like that forever... Even if i try to reboot it, the only option is to plug out/plug in the battery. Impossible to go back to the previous firmware (what a shame on a 2000€ camera). I'm very frustrated my camera is unusable... I update again the firmware with the classic SD option, the process finish the update without a problem but the problem persist cannot do anything with it now. If the camera go sleep... Stucked. If the eye sensor is activated for the EVF... Stucked. If i try to shutdown the camera... Stucked.
Thank you in advance.
Hope that some encountered that problem before and can help.
I get my X-T4 a few weeks ago with FW 1.17 and it seemed to work correctly but just for the sake of having most up-to-date version I updated to 1.22).
After the update my fav view mode ([EYE SENSOR] + [LCD IMAGE DISP.]) is corrupted. It essentially keeps the LCD on whenever eye is away from EVF.
Image preview is set 1.5 sec and is displayed correctly only on LCD screen. I set the LCD do info screen but it's not really how I'd like to have it working.
I was hoping that 1.23 will fix it but unfortunately no change after yesterday's release.
Thank you in advance!
Fuji X-T4, software version 1.22. When I set "clarity" (IQ, image quality settings 2/3) to any value other than 0, processing of single images (raw or jpeg) is noticeably very slow, i.e. it takes about half a second to process one image. When set to 0 processing is not noticeable (i.e. very quick). Is this a normal behaviour ?
I received my new X-T4 not 6 weeks ago and it's currently in with Fuji Canada due to an issue with high speed bursts. The images (shot in RAW) came out with a digital artifact straight through the centre of each image, the first of each burst being ok, but the rest having this pixel perfectly straight bang in the middle purple line.
Thank you for checking, I have just observed the same behavior with the 35mm f/2 - X-S10 with v2.10 chooses 1/100s. I guess I will use the specific minimum shutter speed or simply force myself to use the M mode more.