Jump to content

Shutter speeds of over 1 second

hnurminen

By hnurminen
in Fuji X-T4

 Share

Recommended Posts

hnurminen Newbie

hnurminen

Posted
Posted

Hello all! I'm Henry and I recently switched from another brand to Fuji X-T4. 

I have a problem with the shutter speed 'T' setting. According to the manual, I should be able to use the rear command dial to change the shutter speed but in my case that's not so. With the shutter speed dial at 'T' the actual shutter speed is locked at 1/25 of a second and I can't alter that - not by rotating the rear command dial or anything else for that matter.

Also, in manual mode I should, it is said in the manual, be able to alter the shutter speed in increments of 1/3 EV using the rear command dial. This, too, is not the case with me.

The rear command dial works fine in other areas, so it's not broken or anything. 

Does anyone have any idea what the problem here might be? Some settings that I have possibly changed or something.

Thanks in advance!

/Henry

Link to post
Share on other sites
bem Collaborator

bem

Posted
Posted

I can adjust Shutter speed with rear right dial. I have set it in menu settings I want to adjust shutter speed on that "wheel" (to right decrease value, to left increase value). On front wheel on right side on X-T4 I can adjust ISO (also Apperture and value on that wheel, just cklick on the wheel and then rotate to select between them and confirm with click on wheel, select desired value. I mostly use manual settings for SS (Shutter Speed), ISO and Apereture ("F"). I have the right horizintal dial for shutter speed on top of X-T4 set to "T" (the little white dot is towards T) and then has that locked with press on top button so the dial is locked.

Try read the X-T4 user manual some to get You on the right track to solve the problem that is with Your camera now that You can not select higher Shutter Speed (SS) then 125. Check in the camera Settings:
SET UP
BUTTOM/DIAL SETTINGS
COMMAND DAIL SETTINGS
Check what is assigned for the rear right dial (wheel).

Link to post
Share on other sites
  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...