Jump to content

Fuji XT 1 and X100t for production stills

chrisgilesimages
 Share

Recommended Posts

chrisgilesimages Newbie

chrisgilesimages

Posted
Posted

Full disclosure: I'm a Canon shooter with a burning desire to switch to Fuji but can't justify it yet because I shoot a lot of video too. Hopefully soon.

 

I just got an inquiry to shoot production stills of a reality series. Does anyone have experience shooting production stills on set with Fuji and can you provide any insights. If they are quiet enough it would be such a better experience than working with a blimp on my 5D mkII. I'm thinking that I'd like to rent a XT1/56mm and a x100t. I've shot with both cameras before but didn't critically notice the sound of the camera.

 

Thoughts?

 

Thanks

Chris

 

 

 

 

Link to post
Share on other sites
kielinski Explorer

kielinski

Posted
Posted

I've never shot production stills when a blimp was required, but...

With Silent Mode : ON  and Electronic Shutter only enabled the camera makes no sound during operation.  Very minor AF noise from the lens (tested with the 18-55) - but you could shoot MF and kill it entirely.

Link to post
Share on other sites
Phil Community Regular

Phil

Posted
Posted

Yeah, I thought about the electronic shutter but a friend told me you can get some distortion with movement. In silent mode it is probably pretty quiet. 

I haven't found too much of an issue. I haven't used it shooting any serious movement, though, like sports or vehicles. The mechanical shutter of the X-T1 is still one of the more quiet I've used.

 

The leaf shutter on the X100T is essentially silent.

Link to post
Share on other sites
didiergm Rookie

didiergm

Posted
Posted

Another thing springs to mind: beware of lighting with the electronic shutter. Since the readout of the frame takes 1/15 second, any light flickering faster than that risk producing dark banding. I am thinking partly dimmed LED lighting. This could be an issue.

 

That said, the mechanical shutter nose is nowhere near the noise produced by my old Nikon D2hs or D3. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Neil Rosenberg
      Infrared Photography on X-E2 665nm

      By Neil Rosenberg · Posted

      I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Neil Rosenberg
      Infrared

      By Neil Rosenberg · Posted

      In reply to the original question, it all depends on what you mean by infrared.  If you mean "see thermal information", then I agree with the comments here.  However, if you mean near-infrared, the X-T4, or basically any digital camera can be modified to "see" it.  Check out Lifepixel.com and Kolarivision.com for more info. As regards lenses, I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Greybeard
      XS10 and manual lenses

      By Greybeard · Posted

      No - I don’t think so - it means you can take pictures if you remove the lens completely - but I’m not sure that is a problem
    • mcewena
      XS10 and manual lenses

      By mcewena · Posted

      I bought a manual lens over xmas and it took me a while to find the "shutter w/o lens" function in the menu settings.  So far I haven't found a way to either put that on the Q menu or marry that setting to one of the 4 custom modes.   Am I missing something? Is there a problem if I just leave that setting enabled even when the OEM auto lens is in place? tia
    • Greybeard
      Apple Support for Compressed RAF files

      By Greybeard · Posted

      It appears that Apple now (at last!) fully supports FujiFilm Lossless and Compressed RAF files. In the latest updates of MacOS Tahoe 26.2, iOS 26 and iPadOS 26 compressed files are supported in Finder/Files and the Photos app. Good news for those of us with Macs and iPads.
×
×
  • Create New...