Jump to content

Recommended Posts

Hello, 

I don't know much about cameras/lenses and photography but I get by doing some amatuer snapping here and there. 

However, I need to do some real estate photography and I was told I needed a 10-24mm lens to avoid wild barreling and the chore of using software. 

But I am confused by the 15-35mm equivalence thingy. 

WIll the Fuji 10-24mm do the job (especially in small rooms) ?

Thanks in anticipation of your kind (and simple) answers, 

Link to post
Share on other sites

  • 4 weeks later...

Focal length equivalency depends on the size of the sensor. You've posted this message in the GFX-lenses section (which is for Fuji's medium format sensor cameras) but I guess you use an X-system camera from Fuji with the smaller APS-C sensor. Right between APS-C and medium format are the so-called Full Frame (FF) sensor cameras. This was in the days of film the most used size of film for amateur photographers. That is why focal lengths of lenses are often recalculated to the FF equivalency. From APS-C to FF the 'crop-factor' is 1.5x

The 10-24 f4 Fuji lens therefore has a full frame equivalency of approx. 15-35mm meaning it gives you that same angle of view. It ranges from an super wide-angle to a standard wide-angle view. That makes it perfect for architecture, indoor architecture and landscape.

The 10-24 has two main advantages for your intended use: first it doesn't have a lot of distortion in the super wide-angle mode, so you don't need software to correct the image all the time (keystone correction). Precondition is that you keep the camera and lens level at shooting (and not tilted backwards). Secondly, it has an optical image stabilizer. So, shooting indoor with longer shutter speeds isn't too much of a problem, since the lens corrects motion blur in some degree. That compensates for the fact it has not a really fast aperture (f4) so your low-light/indoor shutter speeds can be a bit longer (I would say up to 1/8s).

Edited by Herco
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

  • Posts

    • (Open Thread) Not a winter landscape, but still cold.

      Welcome, dear visitor! As registered member you'd see an image here…

      Simply register for free here – We are always happy to welcome new members!

       
    • agreed on the upload but based on the location and number it sounds exactly like the storage slot 1 status icon
    • All three of my bodies (X-E2, X-T4, GFX100S II) have shoot without lenses enabled and they have all had it set since I bought them.  No harm in it at all. Just remember to set the focal length when you fit a manual lens with no electronics otherwise the IBIS (if you have it) goes nuts. I regularly use vintage film lenses from Minolta, Zeiss, Mamiya, Rollei and others on my X mounts along with more modern manual focus stuff from TTArtisans. I also use Nikon AF-S lenses with a Fringer so the world is your oyster! Vintage lenses can be an absolute bargain too - For example the Zeiss 135 f/35 in M42 is as cheap as chips and very sharp as is the excellent Minolta 35-70 Macro (which is also rebadged Leica). 
    • I'm not exaggerating when I say that I have searched with great vigor (and at great expense) for a way to capture IR images with a Fujifilm camera for which I didn't have to use major amounts of sharpening to bring out the best. Zooms, primes, Fuji, Tamron, Viltrox, Sigma, Zeiss ... probably 20 lenses all told. Plus multiple IR converted Fuji cameras, X-T1, X-T3, X-T5. I even tried different ways of filtering IR, such as using the Kolari clip-ins and lens-mounted front filters. I was ready to give up until I almost accidentally tried one of the cheapest lenses out there -- the little TTArtisan 27mm F2.8. No hotspots that I could see, and best of all ABSOLUTELY SUPERB SHARPNESS across the entire frame. It's this attribute that I search for, and until now, never achieved. In my prior attempts, I listened to the advice from the "pundits", picking up a copy of the venerable Fuji 14mm F2.8, the Zeiss Touitt 12mm F2.8, Fuji 23 and 35mm F2.0, even the very similar 7Artisans 27mm F2.8, and none of them come even close to the TTArtisan for edge sharpness in infrared. Incidentally, I'm using a Kolari 720nm clip-in filter. Sure the TT has its issues -- vignetting at 2.8, tendency to flare with sunlight nearby, but all in all, this lens is glued to my X-T5 for now. This image was taken hand-held with this lens -- completely unedited!
    • Hy there When Im using the fan001 on the XH2s and I flip the LCD Screen vertically by 180 degrees then the image flips vertically, what is good but it also flips horizontally. The clean feed on HDMI is not flipping horizontally but its also flipping if the HDMI output info display is on. When I unmount the fan then the image flips only vertically. My firmware is updated to the latest version. Any ideas if there is a fix for that?
×
×
  • Create New...