Jump to content

Visiting Fujifilm in Tokyo

paulb

By paulb
in General Discussion

 Share

Recommended Posts

paulb Newbie

paulb

Posted
Posted

I had a very good experience visiting the Fujifilm Square on the ground (first) floor of Fujifilm's head office in Tokyo Midtown. There are a couple of photo exhibitions, which are pleasant, and a lineup of old cameras as well as all the X-series (including the 90mm f2). However, the highlight is the lens and camera rental service. If you return the gear before 6:30 the same day, it is free. Today I took out the 16-55 and 50-140 lenses for the day. All lenses and bodies are available; you just need to show photo ID and a credit card. 

 

I also had a chat with the man at the service desk. He confirmed the old story that the buttons on the early-run X-T1 (which I have) are mushy and useless, and were replaced fairly early on in the production run (and of course in the graphite version). There is no replacement service but if the buttons become completely unresponsive they will swap them out. 

 

I asked if the 90mm will be available for a day's free rental next week. No, all the early copies will be supplied to retail, and it will be a couple more weeks before Fujifilm get any for us to play with.

 

Hope this helps - a great way to spend an afternoon in Tokyo. Numbers of rental copies may be limited - I got the last 16-55 on a Wednesday afternoon - but the whole range is there.

Link to post
Share on other sites
  • 1 month later...
Mehrdad Enthusiast

Mehrdad

Posted
Posted

Thanks again paulb,

Just visited the guys in Tokyo/Roppongi yesterday. Love the rental service, too.

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Sorry for the quality. Edited on the iPhone (and the panaorama is a iPhone pic, too)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Typically you need to make sure the lens is compatible with the camera, i.e. check the lens compatibility charts for your camera, then make sure the respective firmwares are updated so older issues are resolved. After that, each lens has a manufacturer’s profile which will be embedded into the raw file meta data for the images captured using that lens. From there, it is up to the raw conversion software to apply the lens correction to the image. Different converters do that differently, some automatically, some only if a setting is turned on. For in-camera jpegs, the on-board converter does the corrections automatically, assuming the camera recognizes the lens, it applies a generic profile otherwise. I do not know if that can be turned off or not.
×
×
  • Create New...