Jump to content

Face/Eye-Detect Mode Won't "Stick"

MailerDaemon
 Share

Recommended Posts

MailerDaemon Apprentice

MailerDaemon

Posted
Posted

Has anyone had odd behavior with the Face/Eye-Detection setting seeming to change itself to off with an X-Pro3. I realize it's likely me but I can't duplicate the cause and that's throwing me off.

 

I set the focus area to all and turn on Face/Eye-Detect to Eye Auto. It will function for a length of time then, looking through the OVF, it won't recognize a face. Curious, I check the setting and it's turned Face/Eye-Detection off. I turn it back on without changing any other settings and poof, face recognition works fine. Rinse and repeat.

 

The detect setting is not assigned to a function button. I tried changing batteries, memory cards, metering modes, zone/point focus modes, focus point displays, film simulations, movie/stills mode, exposure comp, flipping screens and all the dials, changing the OVF/EVF, and changing lenses with the camera on and off and nothing seems to duplicate the occasional surprise change in the setting.

It's one of those things that happens when I'm not paying attention to it -- Haha... okay, I know it sounds crazy but I'm wondering if there is anyone with some suggestions on what I may be overlooking as a possible cause.

Link to post
Share on other sites
  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Content

  • Posts

    • Giampaolo Masserano
      Looking for Full Frame lenses to adapt to GFX

      By Giampaolo Masserano · Posted

      I use a TECHART ring to mount Canon EF lenses on the GFX 50S-II and 100S-II, maintaining image stabilization and autofocus. The only limitation are lenses with a small rear element diameter that make it impossible to cover medium format. Fast lenses like the EF 85/1.2L or the 100-400L, however, work great.
    • thelostkiwi
      Looking for Full Frame lenses to adapt to GFX

      By thelostkiwi · Posted

      I also use a Nikon to GFX Fringer and it works very well.  24mm f/1.8 vignettes so best used on 35mm mode.  50mm f/1.8 covers the entire frame very well with no issues and is a superb little lens. 105mm Sigma vignettes slightly but is perfectly usable. 300 f/4 likewise the 105.  I have a 70-200 f/20+.8 incoming to test so will report back but I'm expecting a little vignetting.  Even in 35mm mode the image is still 60MP and if you're prepared to manually crop and correct you can get 80-90 MP images.  I also have a C/Y to GFX adapter.  The 24mm Sigma Superwide vignettes strongly. Ditto 28-80 Zeiss Sonnar. 80-200 f/4 Sonnar is perfectly usable. All work fine as 35mm mode lenses.  I also have an M42 adapter which I tried with the Carl Zeiss Jena 135mm f/3.5 with good results. 
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Thank you. I will research it.
    • jerryy
      Image correction with GF20-35

      By jerryy · Posted

      Ahh, the infamous brick wall photos… 😀 According to internet lore, if the dng converter does not properly apply the corrections, you can have it apply custom profiles that should work for you. How to do that is waaaaaay outside of this comment’s scope, but there are plenty of sites listed in the search engines that step you through the processes. Best wishes.
    • Trevor R
      Image correction with GF20-35

      By Trevor R · Posted

      Jerry Thank you very much. That is extremely helpful. It seems that the camera and the lens have the latest firmware update, so it appears that the corrections should be applied automatically. The lens arrived this afternoon and I took some quick test shots, in which the correct lens information appeared in the EXIF files, so that sounds good. I used Adobe DNG converter to convert the Raw (RAF) files, and then opened the DNG files and saved them in PSD format. However, with a beautiful, clear, cloudless blue sky, there were no lines near the edges to check if distortion had been corrected. Another day I plan to photograph a brick wall. Thank you for your help.
×
×
  • Create New...